<![CDATA[SoliForum - 3D Printing Community — Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/topic/2947/ceramic-heater-cartridge-on-sd-2/ Thu, 18 Jul 2013 14:08:56 +0000 PunBB <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/30195/#p30195 Also run autotune...

http://www.soliwiki.com/PID_tuning

]]> Thu, 18 Jul 2013 14:08:56 +0000 https://www.soliforum.com/post/30195/#p30195 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/30095/#p30095 As far I can see i would answer : Yes but you must also connect the thermistor of course !
You first  need to change  the connectors of the heater and of the Thermistor,  it's better to use bec connectors, it's easier to find(in RC shop for example).
The original resistor or a ceramic heater can works with the same connector it's just some power flow used for the both.

]]> Wed, 17 Jul 2013 14:01:48 +0000 https://www.soliforum.com/post/30095/#p30095 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/30094/#p30094 So can we just remove the connector to the resistor and then put it on the cartridge heater?  No other wiring necessary?

]]> Wed, 17 Jul 2013 13:15:08 +0000 https://www.soliforum.com/post/30094/#p30094 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/28160/#p28160 So it seems that I made a "not so bad" choice !
Thanks all !!

]]> Thu, 27 Jun 2013 12:30:08 +0000 https://www.soliforum.com/post/28160/#p28160 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/28159/#p28159 Have been running the very same 40w heater for seveal months now...zero problems,,,unlike the failed 3 resisitors from solidoodle that lasted about 1 week each!

]]> Thu, 27 Jun 2013 11:44:05 +0000 https://www.soliforum.com/post/28159/#p28159 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/27992/#p27992 Thanks  !
I'm going to order it  ...  wink

]]> Wed, 26 Jun 2013 04:10:55 +0000 https://www.soliforum.com/post/27992/#p27992 <![CDATA[Re: Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/27975/#p27975 I have that same heating element and so far, no issues with stock units

]]> Wed, 26 Jun 2013 02:21:54 +0000 https://www.soliforum.com/post/27975/#p27975 <![CDATA[Ceramic Heater Cartridge on SD 2]]> https://www.soliforum.com/post/27898/#p27898 A simple question for SD 2 owners:

I want to mount a j-head mk5 with  a ceramic heater 12 v 40 w  like this one :

http://reprapworld.com/?products_detail … =1616_1652

Do I need to change the power unit of the SD2 or is it strong enough for this heater ?

]]> Tue, 25 Jun 2013 15:23:44 +0000 https://www.soliforum.com/post/27898/#p27898