<![CDATA[SoliForum - 3D Printing Community — Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/topic/2662/only-a-little-offcenter-on-that-rod-drilling-15/ Mon, 17 Jun 2013 04:09:33 +0000 PunBB <![CDATA[Re: Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/26637/#p26637 Ya. I just checked my old z-rod and it looks worse than the one pictured above. Dramatic improvements since the M5 switch, needless to say.
I wonder how widespread this is. I'm just going to throw this out there, maybe it would help to fix some issues, or narrow some down; I ordered my S2 in August and it arrived in December. The serial is #02118.

]]> Mon, 17 Jun 2013 04:09:33 +0000 https://www.soliforum.com/post/26637/#p26637 <![CDATA[Re: Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/26075/#p26075 caswal wrote:

I know they like everything to be made/assembled in USA, but my lead screw is really nice, and cost me $27 shipped to my door, for 1, from here: http://www.aliexpress.com/snapshot/212901447.html

I would of thought, with a bulk order the costs would be similar to getting some guy in NY to cut and drill some threaded rod.

180mm is it enought ? can you put a picture of your installed screw ? how do you joinded it to the motor ?
thanks

]]> Wed, 12 Jun 2013 14:02:09 +0000 https://www.soliforum.com/post/26075/#p26075 <![CDATA[Re: Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/26071/#p26071 I know they like everything to be made/assembled in USA, but my lead screw is really nice, and cost me $27 shipped to my door, for 1, from here: http://www.aliexpress.com/snapshot/212901447.html

I would of thought, with a bulk order the costs would be similar to getting some guy in NY to cut and drill some threaded rod.

]]> Wed, 12 Jun 2013 13:30:26 +0000 https://www.soliforum.com/post/26071/#p26071 <![CDATA[Re: Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/25186/#p25186 Wow, that will definitely give you banding from the perimeter speeds varying with angle.

I also think SD should rethink how they are having those rods bored because hand drilling them is just not the way to do it.

]]> Tue, 04 Jun 2013 06:13:52 +0000 https://www.soliforum.com/post/25186/#p25186 <![CDATA[Re: Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/25064/#p25064 Wow..........

]]> Mon, 03 Jun 2013 15:32:06 +0000 https://www.soliforum.com/post/25064/#p25064 <![CDATA[Only a *little* off-center on that rod drilling ;) (15% !)]]> https://www.soliforum.com/post/25062/#p25062 So sick to death of my gross banding, I did the 5mm Rod kit conversion tonight.

Interesting on examining the bore hole at the end of my rod... To say its off-center is a tad of an understatement wink

Major diameter on 5/16" should be 7.9375 mm's .
The bore hole measures exactly 5 mm's.
This means a centered bore should measure 1.4687 wall thickness when measured across its center.

Instead, mine measures 1.29 and 1.64.. putting it nearly ~ .17 mm's off-center ... Or nearly 15%! yikes

Whats ~15% errors in wobble tolerances between friends when you're talking about .1mm layers wink

http://farm8.staticflickr.com/7314/8936445870_da1ec4467d_z.jpg
http://farm4.staticflickr.com/3818/8935818123_e0e3433d67_z.jpg
http://farm3.staticflickr.com/2818/8935805339_92fb32e0de_z.jpg

]]> Mon, 03 Jun 2013 15:25:40 +0000 https://www.soliforum.com/post/25062/#p25062