<![CDATA[SoliForum - 3D Printing Community — hex nut]]> https://www.soliforum.com/topic/2609/hex-nut/ Fri, 31 May 2013 17:42:09 +0000 PunBB <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24726/#p24726 ronsii wrote:

Nope... wink

HAHAHAHA! Nice!

]]> Fri, 31 May 2013 17:42:09 +0000 https://www.soliforum.com/post/24726/#p24726 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24673/#p24673 Nope... wink

]]> Fri, 31 May 2013 03:37:58 +0000 https://www.soliforum.com/post/24673/#p24673 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24671/#p24671 Ronsi is that what I think it is?

]]> Fri, 31 May 2013 03:36:14 +0000 https://www.soliforum.com/post/24671/#p24671 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24667/#p24667 Here is one I did at .3 the settings were a little off but only has about 5 minutes of exacto trimming(had a few strings) and been threaded together once.


http://i.imgur.com/1aNk50i.jpg

]]> Fri, 31 May 2013 03:17:34 +0000 https://www.soliforum.com/post/24667/#p24667 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24643/#p24643 DePartedPrinter wrote:

In my experience, if you want perfect threads you need to print at .1mm with a fan mod.  I have a picture posted somewhere of an example.

http://www.soliforum.com/misc.php?action=pun_attachment&amp;item=1474&amp;download=0

Sick!

]]> Fri, 31 May 2013 00:31:45 +0000 https://www.soliforum.com/post/24643/#p24643 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24576/#p24576 In my experience, if you want perfect threads you need to print at .1mm with a fan mod.  I have a picture posted somewhere of an example.

http://www.soliforum.com/misc.php?action=pun_attachment&amp;item=1474&amp;download=0

]]> Thu, 30 May 2013 16:05:08 +0000 https://www.soliforum.com/post/24576/#p24576 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24572/#p24572 I have been working on a joystick extension. .1mm height M36x2 threads. I had some extruder problems but you get the idea.

https://dl.dropboxusercontent.com/u/352 … .21.06.jpg

]]> Thu, 30 May 2013 15:28:06 +0000 https://www.soliforum.com/post/24572/#p24572 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24546/#p24546 I've tried printing a few and the best method I've came up with is printing it is to the relevant ISO/BS/ASME standard or whatever and then running a tap/die over them...

For me at least, I notice that getting down to an M8 size is about the limit that I can go without shearing the stud easily during tha tap/die process....that is...IF the stud is printed with the hex on the bed..........printing them lying down on the bed makes them ALOT stronger but not near as pretty.

i pretty much print everything at 0.2mm z height too.

.........std. thread charts show sharp edges.......
filament is naturally rounded.....
so you wont get a true thread without a tap/die being used post printing....

sure it'll screw on; but with alot of friction present...think of a nyloc nut..

EDIT: When printing threads that I run over with a die/tap, I switch ON the randomise start point setting if possible...(by default I leave this off as I think the quality isn't as nice with its left on....)  its far easier to cut the thread than having them all lined up when the setting is off:)...:)

]]> Thu, 30 May 2013 12:33:57 +0000 https://www.soliforum.com/post/24546/#p24546 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24524/#p24524 http://www.thingiverse.com/make:35809

5/16 nut and bolt

]]> Thu, 30 May 2013 07:11:46 +0000 https://www.soliforum.com/post/24524/#p24524 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24508/#p24508 What z res are you trying it in and what size nut?

]]> Thu, 30 May 2013 00:17:51 +0000 https://www.soliforum.com/post/24508/#p24508 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24507/#p24507 ok thanks ,I'll keep trying

]]> Thu, 30 May 2013 00:12:57 +0000 https://www.soliforum.com/post/24507/#p24507 <![CDATA[Re: hex nut]]> https://www.soliforum.com/post/24506/#p24506 I have printed several things with inside threads and they turn out fine sometimes a little stringy wink the key is have everything dialed in especially with regard to overhangs.

]]> Thu, 30 May 2013 00:11:45 +0000 https://www.soliforum.com/post/24506/#p24506 <![CDATA[hex nut]]> https://www.soliforum.com/post/24505/#p24505 Has anybody  successfully printed a  hex nut  that actually looks threaded and works? I tried several off thingiverse with little luck.

]]> Thu, 30 May 2013 00:02:09 +0000 https://www.soliforum.com/post/24505/#p24505