<![CDATA[SoliForum - 3D Printing Community — "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/topic/2523/maximum-infill-thickness-cant-exceed-nozzle-diameter/ Fri, 24 May 2013 03:32:39 +0000 PunBB <![CDATA[Re: "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23888/#p23888 You will frequently find when switching "infill every X layers" that teh settings will not properly change. To solve this, set it to infill every "XXXX" (big number) layers, then resave as the amount you actually want. After flushing it with the big number, it seems to work. It's a problem with Slic3r

]]> Fri, 24 May 2013 03:32:39 +0000 https://www.soliforum.com/post/23888/#p23888 <![CDATA[Re: "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23886/#p23886 I just changed everything to an extrusion width of .42 and I changed it to infill every 1 layer. Now it works. yay, thanks guys. Man, I am getting this printer figured out one problem at a time. I think my only problem now is a little sticking problem. 99% of the part stays stuck but sometimes it doesn't. I think I might try glue next. Is there a way to slow the printing on just the first layer? Maybe that will help a little.

]]> Fri, 24 May 2013 03:21:16 +0000 https://www.soliforum.com/post/23886/#p23886 <![CDATA[Re: "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23874/#p23874 Check the settings in slic3r. Either open slic3r direct or go to RH ==> Slicer Tab ==> Slic3r section ; Configure.

The check print settings ==> Advanced ; extrusion width

]]> Fri, 24 May 2013 01:37:28 +0000 https://www.soliforum.com/post/23874/#p23874 <![CDATA[Re: "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23873/#p23873 printing at .1mm or .3mm? I had the same issue , it was driving me crazy. If at .3mm on the infill every nth layer it cant be more than one. example  infill every 2 layers is .6mm  which does exceed the nozzle diameter. You can use infill every3 layers if you use .1mm.

]]> Fri, 24 May 2013 01:10:10 +0000 https://www.soliforum.com/post/23873/#p23873 <![CDATA[Re: "Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23871/#p23871 What's the infill extrusion width set at?

]]> Fri, 24 May 2013 00:59:14 +0000 https://www.soliforum.com/post/23871/#p23871 <![CDATA["Maximum infill thickness can't exceed nozzle diameter"]]> https://www.soliforum.com/post/23870/#p23870 All of the sudden I am getting this message when I try to slice my models with slic3r. What's wrong.

]]> Fri, 24 May 2013 00:47:13 +0000 https://www.soliforum.com/post/23870/#p23870