<![CDATA[SoliForum - 3D Printing Community — Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/topic/2470/beta-of-updated-firmware-improved-pausefilament-chg-etc/ Sat, 14 Mar 2015 04:27:37 +0000 PunBB <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/89606/#p89606 I've got a CTC duel extruder firmware problem.  Am I in the right place?  I was printing one or two items a day before the filament started curling on the nozzle and dragging print jobs all over the hot plate, so I went online and saw a YouTube on firmware up dates, hence the story goes .......
It all started on a warm and cozy night and a dirty extruder issue, then it snow balled into a 7.4 Mighyboard firmware install that locked up my printer.  I get no response  from the printer, there's nothing on the LCD and the plate is hot!
I tried to reset the board through "Replicator 040" but got no where.

Any help out there?
Thanks for reading
Mayhem

]]> Sat, 14 Mar 2015 04:27:37 +0000 https://www.soliforum.com/post/89606/#p89606 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/68903/#p68903 I developed an add-on product that can be attached to the filament to trigger this pause feature whenever a filament issue is detected.
I'm low on stock right now, but toybuilderlabs still has stock. The website is tunell.us

]]> Fri, 17 Oct 2014 16:40:33 +0000 https://www.soliforum.com/post/68903/#p68903 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/59009/#p59009 Very cool.  You might find Interesting some changes I made for pausing and resuming with and LCD.  In particular the "resume from z level" lets you rescue a print that has already failed by seeking to the top of a partial print and the code will automatically split the gcode virtually and print the remainder of the object.

http://www.soliforum.com/topic/5971/fir … ed-prints/

]]> Fri, 20 Jun 2014 15:45:05 +0000 https://www.soliforum.com/post/59009/#p59009 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/58969/#p58969 Hey Adrian,

I just received a SD2 w/ printrboard revE, and stumbled upon this thread while looking for SD card and LCD support. I may be late however I noticed you said you don't have a printrboard. If you need help to solve any issues with the printrboard, I'll be happy to test anything and give you feedback.

By the way, what LCD are you using in your youtube video? Thx!

]]> Fri, 20 Jun 2014 04:32:32 +0000 https://www.soliforum.com/post/58969/#p58969 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/35928/#p35928 Yeah... I did some work the other week on it, but still need to cleanup and push the changes. If used in a pure Repetier-Host driven environment, it works beautifully... but trying to cater for both standalone LCD and RepetierHost with the same code is just a PITA...

I also broke the SD Card reading, which I've fixed..

But it does 'work' - just has the occasionally quirk to be aware of...

I'll update here when I push the code couple of days or so...

]]> Wed, 11 Sep 2013 09:18:03 +0000 https://www.soliforum.com/post/35928/#p35928 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/35907/#p35907 This is tested and works. I use it all the time. smile

]]> Wed, 11 Sep 2013 04:27:56 +0000 https://www.soliforum.com/post/35907/#p35907 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/35906/#p35906 Hi N23d, This link cover the basics you should know on how to connect and program arduino stuff ---> http://arduino.cc/en/Guide/Windows

]]> Wed, 11 Sep 2013 04:26:05 +0000 https://www.soliforum.com/post/35906/#p35906 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/35902/#p35902 Hey Adrian,

Did you ever get this M600 figured out?

I want to get this up and running on my Solidoodle 3...

So I went to the indicated GIT repository and downloaded the files.

I am a PC user (on this PC, XP 32-bit - soon upgrading to Win7 64 bit...)

Following the instructions, it says to unzip the files and modify the configuration.h file, but there is no configuration.h file in the .rar file! 

Even  though I couldn't find configuration.h, I thought I'd see if I could 'upload the firmware' but this really isn't clear either... I'm looking at some Arduino interface and it isn't even close to clear on how to upload firmware. Do I even use Arduinio.exe? or am I in the wrong spot?

uh, so... Could I please get some help? The other colors of filament are coming soon and I'd be more than glad to test it out for you!

]]> Wed, 11 Sep 2013 03:31:41 +0000 https://www.soliforum.com/post/35902/#p35902 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28450/#p28450 I'm getting to this still today hopefully - been tied up with something and the printer is busy printing anyway (its too much PITA to test the auto-pause using spare RAMPS etc.. easier done on actual printer...)

]]> Sun, 30 Jun 2013 05:28:28 +0000 https://www.soliforum.com/post/28450/#p28450 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28147/#p28147 Theoretically - I'll wait till Solidoodle post their firmware and let you know as I don't have a Printrboard handy. I think I have an AT90 somewhere though... so lemme see...

]]> Thu, 27 Jun 2013 05:31:51 +0000 https://www.soliforum.com/post/28147/#p28147 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28117/#p28117 Are these firmwares good for the newer solidoodle boards as well?

]]> Wed, 26 Jun 2013 22:00:45 +0000 https://www.soliforum.com/post/28117/#p28117 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28045/#p28045 2n2r5 wrote:

I thought the "resume print" on the panel was going to issue the M601 command. Face | palm ... Will try again when I get home.

It should, I'll have to recheck the code I previously committed. But thats what it does *now* anyway wink I was referring more to what needs to be done via Repetier (if you don't have an LCD Panel....). But yes, "Resume Print" should do what it says on the Box big_smile

I need to cleanup some stuff, and I'll re-commit what I have now anyway in the next day or so. Come the weekend, I'll pull my finger out and finish it off... I was planning on doing the hot-end shootout, but since I no longer have a Solidoodle OEM hotend, its probably greatly diminished in immediate relevance and it seems the firmware is now more relevant to more people smile

]]> Wed, 26 Jun 2013 15:11:15 +0000 https://www.soliforum.com/post/28045/#p28045 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28044/#p28044 adrian wrote:

Nice setup on the filament switch smile

Moving the extruder should be a non issue - before it releases the head it saves the last print position. an M601 will return it to the correct location - ideally this will be a menu option off the LCD.. and as for Repetier-Host... not sure on how I'll tackle that bit besides the present advice of 'Issue M601 before clicking Continue'.

LCD Buzzer yes, it should work, but I had to tweak some stuff there which has meant its kind of flakey at the moment. In programming terms, the previous Buzzer Code was 'blocking' - not what you want when you are relying on the execution of further code.  It'll be back next upload to GitHub.

I thought the "resume print" on the panel was going to issue the M601 command. Face | palm ... Will try again when I get home.

]]> Wed, 26 Jun 2013 15:07:30 +0000 https://www.soliforum.com/post/28044/#p28044 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28016/#p28016 One of the tabs broke on my round end adapter. I need to use the other hole anyways which requires me to move some cables. I just haven't felt like rewiring everything.

the tab might have broken because of the weight. I am going to reprint with my black filament. It seems to he a bit more stout and better suited for the application.

]]> Wed, 26 Jun 2013 10:31:30 +0000 https://www.soliforum.com/post/28016/#p28016 <![CDATA[Re: Beta of updated firmware, improved Pause/Filament Chg, etc]]> https://www.soliforum.com/post/28014/#p28014 On holidays next week, will test this properly then.

2n2r5, your cable chain sags a lot? Is there a lot of wiggle in your fit between the links or is it because the SD3 has more links?

]]> Wed, 26 Jun 2013 09:59:55 +0000 https://www.soliforum.com/post/28014/#p28014