https://www.soliforum.com/topic/2225/mk4-causes-tangle/ Mon, 29 Apr 2013 19:52:54 +0000 PunBB https://www.soliforum.com/post/21274/#p21274 dubbs, that is a great color.  What brand is that filament?

]]> Mon, 29 Apr 2013 19:52:54 +0000 https://www.soliforum.com/post/21274/#p21274 https://www.soliforum.com/post/21259/#p21259 I also had this issue till I moved the hobbed gear, also a failing hotend did this a couple of times.

]]> Mon, 29 Apr 2013 18:57:47 +0000 https://www.soliforum.com/post/21259/#p21259 https://www.soliforum.com/post/21234/#p21234 Yeah there must be something else going on, there are so many of us using MK4 or previous versions without any issues.  I haven't had any clogs since switching to MK4 but I did have to move my drive gear to align it with the MK4 opening.

]]> Mon, 29 Apr 2013 15:48:40 +0000 https://www.soliforum.com/post/21234/#p21234 https://www.soliforum.com/post/21233/#p21233 Mine loosens its grip on the PEEK as it heats up and lets the opening get out of alignment.  I have a kind of bar pushed on to the mounting knobs so the two sides of the mount can't spread apart.

]]> Mon, 29 Apr 2013 15:47:00 +0000 https://www.soliforum.com/post/21233/#p21233 https://www.soliforum.com/post/21230/#p21230 This happens to me whenever the nozzel is clogged.

]]> Mon, 29 Apr 2013 15:15:43 +0000 https://www.soliforum.com/post/21230/#p21230 https://www.soliforum.com/post/21223/#p21223 Is your idler bearing centered with respect to groove on the drive gear?  I found that I needed to move one of the washers around the idler bearing to the other side (so there's 3 on one side; one on the other) to center the bearing.

]]> Mon, 29 Apr 2013 14:50:23 +0000 https://www.soliforum.com/post/21223/#p21223 https://www.soliforum.com/post/21184/#p21184 will the mk4 fan duct keep this from happening?
I walked away for 5 minuites

]]> Sun, 28 Apr 2013 22:48:18 +0000 https://www.soliforum.com/post/21184/#p21184