<![CDATA[SoliForum - 3D Printing Community — x and y axis sliders]]> https://www.soliforum.com/topic/2161/x-and-y-axis-sliders/ Tue, 23 Apr 2013 11:18:52 +0000 PunBB <![CDATA[Re: x and y axis sliders]]> https://www.soliforum.com/post/20726/#p20726 This is a good fix.

http://www.soliwiki.com/Extruder_Head_Wobble_Fix

]]> Tue, 23 Apr 2013 11:18:52 +0000 https://www.soliforum.com/post/20726/#p20726 <![CDATA[Re: x and y axis sliders]]> https://www.soliforum.com/post/20700/#p20700 The play doesn't really matter too much as only the bronze bushings control accuracy for an axis, however you can tighten the white blocks together just make sure you leave a little bit of play between them and the rod.

]]> Tue, 23 Apr 2013 02:26:29 +0000 https://www.soliforum.com/post/20700/#p20700 <![CDATA[x and y axis sliders]]> https://www.soliforum.com/post/20694/#p20694 I'll try to explain this. On the x axis under the extruder there are 2 plastic or whatever blocks the rear rod rides on.The same for the right side of the y axis.They seem to wear quickly even tho I greased  the rods.There is noticeable play in both now. Has anybody else noticed this?

]]> Tue, 23 Apr 2013 01:55:05 +0000 https://www.soliforum.com/post/20694/#p20694