SoliForum - 3D Printing Community — made hotend improvements

Re: made hotend improvements

null@example.com (frozensoda) — Wed, 17 Apr 2013 13:43:21 +0000

9/10 would buy

Re: made hotend improvements

null@example.com (badgravity) — Wed, 17 Apr 2013 12:34:52 +0000

danny wrote:

I'd quite like to know the process you used to turn the heat sink.
Did you start with the D shape, and then cut the fins, (I assume on a lathe), or did you start with a round shape and cut the fins, then cut the D shape?

I made in lathe from round shape and the fins were cut with metal saw blade ( did not have 1mm wide bit at hand ) while in lathe and spinning and the D shape was cut off with an angle grinder

Also hers's the drawing for my hot end as requested:

Re: made hotend improvements

null@example.com (danny) — Wed, 17 Apr 2013 11:50:46 +0000

I'd quite like to know the process you used to turn the heat sink.

Did you start with the D shape, and then cut the fins, (I assume on a lathe), or did you start with a round shape and cut the fins, then cut the D shape?

Re: made hotend improvements

null@example.com (badgravity) — Wed, 17 Apr 2013 06:08:50 +0000

danny wrote:

perhaps it is possible that the brass barrel isn't screwed far enough into the peek?
Are you still getting oozing from the peek?
I'm wondering why you unscrewed the barrel from the peek, rather than just leaving the barrel inside the peek?

Maybe ... it's about ~14 mm inside PEEK
I removed it because black ABS clogged the nozzle and when i applied pressure to fillament - saw the hot end turning - just like unscrewing from PEEK.
So i thought that the threads were ruined ... but they werent.

Cant say if there is oozing now beacuse of the radiator and i havent replaced the jigsaw jet
to look closer.

Sorry guys - this is one of - i can share drawings if it's any help ?

Re: made hotend improvements

null@example.com (elmoret) — Wed, 17 Apr 2013 03:05:49 +0000

nlancaster wrote:

+1
I feel a kickstarter in the future.

There's a number of similar hotends already available or launching on KS soon.

It's not as easy as it looks to make something reliable that works in a number of conditions robustly.

Re: made hotend improvements

null@example.com (nlancaster) — Wed, 17 Apr 2013 02:28:43 +0000

I feel a kickstarter in the future.

Re: made hotend improvements

null@example.com (DePartedPrinter) — Tue, 16 Apr 2013 20:40:00 +0000

tealvince wrote:

That's a wicked looking hotend. Have you thought about selling it?

Re: made hotend improvements

null@example.com (coleke) — Tue, 16 Apr 2013 14:56:46 +0000

^ +1

Re: made hotend improvements

null@example.com (tealvince) — Tue, 16 Apr 2013 14:48:21 +0000

That's a wicked looking hotend. Have you thought about selling it?

Re: made hotend improvements

null@example.com (danny) — Tue, 16 Apr 2013 14:08:53 +0000

perhaps it is possible that the brass barrel isn't screwed far enough into the peek?

Are you still getting oozing from the peek?
I'm wondering why you unscrewed the barrel from the peek, rather than just leaving the barrel inside the peek?

Re: made hotend improvements

null@example.com (badgravity) — Mon, 15 Apr 2013 10:08:21 +0000

thankyou
thermistor was in original place on the nozzle.
Oozing happened since day one - not sure about actual temp.
Now the thermistor is inside new block and i lowered extruder temp to 190 .... still not sure about actual nozzle temp.
IR tempgun is in post from china

Re: made hotend improvements

null@example.com (danny) — Mon, 15 Apr 2013 09:40:03 +0000

now that I like very much!!

if you have peek oozing, then your hot end was probably getting too hot, and there may have been an issue with thermistor positioning?

using a heatsink is a pretty good idea

made hotend improvements

null@example.com (badgravity) — Mon, 15 Apr 2013 07:35:35 +0000

Old hotend block was never meant for heater element - so made new block wich should work better, also had some PEEK oozing so thought that if i made some radiator for that and eventually add fan to assist.

new mk4 printhead is allready printed for next upgrade