or level the bed
http://wiki.solidoodle.com/leveling-the-print-bed

The software download instructions come with a pdf file and two ini files.  The ini files are for the solidoodle2.  I have to manually put in the slic3r settings.  Any help on what numbers need to be input would be great.  Customer support by email is responsive, but frankly useless.  Asking if one has downloaded the instructions is not customer service.  Supporting your product and having the software for it, as advertised, IS.

Here's the confusion: It doesn't matter whether the .ini files are loaded for the 2 and 3. They can be opened with a text editor and read. They are rather human readable. You may enter them by hand from here. These are the contents of the .ini files.

Here are the entire contents:

.3mm:

# generated by Slic3r 0.9.6-dev on Tue Nov 27 16:57:32 2012
acceleration = 0
bed_size = 159,150
bed_temperature = 0
bottom_solid_layers = 3
bridge_fan_speed = 100
bridge_flow_ratio = .75
bridge_speed = 75
brim_width = 0
complete_objects = 0
cooling = 1
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode =
external_perimeter_speed = 30
extra_perimeters =
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = .81
extrusion_width = .42
fan_always_on = 0
fan_below_layer_time = 30
filament_diameter = 1.68
fill_angle = 45
fill_density = 0.2
fill_pattern = rectilinear
first_layer_bed_temperature = 0
first_layer_extrusion_width = .42
first_layer_height = .3
first_layer_speed = 30
first_layer_temperature = 195
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = .42
infill_speed = 75
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 5
min_skirt_length = 0
notes =
nozzle_diameter = .35
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_extruder = 1
perimeter_extrusion_width = .42
perimeter_speed = 60
perimeters = 3
post_process =
print_center = 75,75
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 75
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 25
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_speed = 60
start_gcode = G21; set mm units\nG28 ;home all axis\nG90; set absolute coordinates\nG92 E0; reset extruder distance\nM104 S195; set extruder temp and start heating\nG1 Z5 F300 ;move platform down 5mm\nG1 X145 Y145 F3000 ; move to back right corner\nM109 S195; wait for extruder temp to be reached\nG1 Z[first_layer_height] F200 ;move platform close to nozzle\nG1 E7; extruder anchor\nG92 E0; reset extrusion distance\nG1 F3000; Set feed rate for first move.
support_material = 0
support_material_angle = 0
support_material_extruder = 1
support_material_extrusion_width = .25
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_threshold = 45
temperature = 195
threads = 2
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 75
use_relative_e_distances = 0
z_offset = 0

.1mm:
# generated by Slic3r 0.9.6-dev on Tue Nov 27 16:46:32 2012
acceleration = 0
bed_size = 159,150
bed_temperature = 0
bottom_solid_layers = 3
bridge_fan_speed = 100
bridge_flow_ratio = .75
bridge_speed = 75
brim_width = 0
complete_objects = 0
cooling = 1
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode =
external_perimeter_speed = 30
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = .8
extrusion_width = .42
fan_always_on = 0
fan_below_layer_time = 30
filament_diameter = 1.72
fill_angle = 45
fill_density = 0.2
fill_pattern = rectilinear
first_layer_bed_temperature = 0
first_layer_extrusion_width = .42
first_layer_height = .3
first_layer_speed = 20
first_layer_temperature = 195
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 3
infill_extruder = 1
infill_extrusion_width = .42
infill_speed = 60
layer_gcode =
layer_height = 0.1
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 3
min_skirt_length = 0
notes =
nozzle_diameter = .35
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_extruder = 1
perimeter_extrusion_width = .42
perimeter_speed = 55
perimeters = 4
post_process =
print_center = 75,75
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 75
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_fill_pattern = concentric
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_speed = 50
start_gcode = G21; set mm units\nG28 ;home all axis\nG90; set absolute coordinates\nG92 E0; reset extruder distance\nM104 S195; set extruder temp and start heating\nG1 Z5 F300 ;move platform down 5mm\nG1 X145 Y145 F3000 ; move to back right corner\nM109 S195; wait for extruder temp to be reached\nG1 Z[first_layer_height] F200 ;move platform close to nozzle\nG1 E7; extruder anchor\nG92 E0; reset extrusion distance\nG1 F3000; Set feed rate for first move.
support_material = 0
support_material_angle = 0
support_material_extruder = 1
support_material_extrusion_width = .25
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_threshold = 45
temperature = 195
threads = 2
top_solid_infill_speed = 30
top_solid_layers = 4
travel_speed = 60
use_relative_e_distances = 0
z_offset = 0

"Repetier Host
NEW: We are releasing our beta test for the Repetier host all in one installer. This is a far easier program to use for some, please enjoy using it! We will post more comprehensive guides very soon. The installer (for windows only at the moment) can be found here: Windows Installer For Repetier Host.

Please note: If you have a Solidoodle 3, you must use the Repetier package above. You cannot use Pronterface for the moment."

I took the bold too literally.  If you go to the actual instructions page it looks like that mac version of RepHost covers 2 and 3.

BUT...
The Solidoodle 3 instructions for Slic3r and the preset configurations are not in the Repetier for mac v0.55.

I'm going to call and speak to a human about this.

http://www.repetier.com/

Also,  Did you use the install instructions on solidoodle website here

http://www.solidoodle.com/how-to-2/how- … -software/

Now I know I'm not the only designer / modeler that uses a Mac.  Last I checked, this industry was Mac dominated.  Do any of you know a way to get me going until SD actually starts supporting their product?  If not, I am going to repackage this up, drive it down to brooklyn and demand a refund. I'm a bit upset because I'm a grand in with this and the product is not supported as billed on the webpage when I bought it.