<![CDATA[SoliForum - 3D Printing Community — Black abs plugging the nozzle]]> https://www.soliforum.com/topic/1995/black-abs-plugging-the-nozzle/ Sun, 28 Apr 2013 14:58:57 +0000 PunBB <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/21145/#p21145 Anyone know if I put the peek into acetone without melting it?

]]> Sun, 28 Apr 2013 14:58:57 +0000 https://www.soliforum.com/post/21145/#p21145 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/21130/#p21130 Tried also black and got my nozzle clogged. Filament bought from Denmark but origin china. Other colours worked fine.
Now i need new acrylic parts, 2 pieces broke when it jammed.

//Matte

]]> Sun, 28 Apr 2013 12:40:21 +0000 https://www.soliforum.com/post/21130/#p21130 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/19826/#p19826 I just finished a kg roll of black filament with no blockages at all, I have never had one yet .. touch wood.
all my filament so far is from jamie here in oz. (3dprintergear)

I used to print grey and purple at as low as 185, then went to 195, for the black I found I needed 210 to get layers to stick well and even then its nowhere near as good as other colours with layer adhesion.

if only i could get clear to print clear instead of white .. i would be a happy man.

]]> Sat, 13 Apr 2013 14:23:23 +0000 https://www.soliforum.com/post/19826/#p19826 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/19690/#p19690 @IronMan - where do you buy your black filament?

]]> Fri, 12 Apr 2013 15:56:35 +0000 https://www.soliforum.com/post/19690/#p19690 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/19674/#p19674 I have had no issues with my Black filament...in fact, it generally prints better than the other colors!
I print at no higher than 195 and I never let the nozzle remain heated and idle for more than a few seconds...

]]> Fri, 12 Apr 2013 13:35:50 +0000 https://www.soliforum.com/post/19674/#p19674 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/19663/#p19663 lawsy wrote:

If you search here you will find many others with problems in the past concerning Solidoodle black. It was apparently a bad batch so it's concerning to see new users with problems.

Noted

]]> Fri, 12 Apr 2013 12:31:46 +0000 https://www.soliforum.com/post/19663/#p19663 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/19171/#p19171 Mine was from ebay.co.uk

]]> Wed, 10 Apr 2013 07:44:52 +0000 https://www.soliforum.com/post/19171/#p19171 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/18948/#p18948 If you search here you will find many others with problems in the past concerning Solidoodle black. It was apparently a bad batch so it's concerning to see new users with problems.

]]> Mon, 08 Apr 2013 13:06:29 +0000 https://www.soliforum.com/post/18948/#p18948 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/18946/#p18946 I buying filament from solidoodle website

]]> Mon, 08 Apr 2013 12:02:38 +0000 https://www.soliforum.com/post/18946/#p18946 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/18945/#p18945 What brand of filament are you two using?

]]> Mon, 08 Apr 2013 11:47:30 +0000 https://www.soliforum.com/post/18945/#p18945 <![CDATA[Re: Black abs plugging the nozzle]]> https://www.soliforum.com/post/18939/#p18939 Exactly the same thing happened to me yesterday with new black ABS ( other colours were fine )
took the head apart ... had to plug in the hotend and temp sensor to warm up the head so i can remove PEEK while warm.
I also have some oozing to look into.
Youtube has some solidoodle hotend cleaning video but any other ideas are welcomed ...

]]> Mon, 08 Apr 2013 08:28:37 +0000 https://www.soliforum.com/post/18939/#p18939 <![CDATA[Black abs plugging the nozzle]]> https://www.soliforum.com/post/18921/#p18921 I need help with black abs clogging the nozzle 80% thru.
The print looks great thru 80% of print ,then the nozzle gets plugged. Nozzle temp is 197 bed 86.I have no problem with white. Any idea please post ?

]]> Mon, 08 Apr 2013 00:09:21 +0000 https://www.soliforum.com/post/18921/#p18921