davinci 1.0A FIRMWARE UPDATE USING XYZPrinting Pro-e  software.

Has anybody had success updating the Davinci 1.0A with the Pro-e software???  machine fingure print is dvF100A000 FW 2.1.4

No, I have a 1.0A and still can't print anything because of the chip BS. I have a brand new spool of XYZ branded filament but it didn't come with a chip at all. Now I'm stuck with a giant paper weight that won't let me print. I've looked up every tutorial I can find and even with Pro-e  software it refuses to print.

I can't get the WiFi to work with the new firmware and Beta software but regular COM works fine. I don't suppose anyone found a better way to use or modify this printer?

Resurrecting this old thread to say thanks AND bring it up the search algo.

Has anybody had success updating the Davinci 1.0A with the Pro-e software???  machine fingure print is dvF100A000 FW 2.1.4

The firmwares embedded in ”XYZprint R2.exe” 2.0.23 Beta are:

...
3FM1X_FW_V3_2_4.bin (250576 bytes) @ 0x9E1C57: "dv1MX0A000+3.2.4"
...

There are many ways to extract them, either using the byte ranges given, or with any Qt resource extractor. In the latter case, they are in the folder ”:/FirmwareUpgrade/Resource/Firmware/”. For manual extraction, note that the length is encoded in the four bytes preceding the given offsets, in big endian. (Also note that there are firmwares with the same fingerprint and version, but different lengths. These might overwrite more or less of the flash memory.)

Can someone help me to extract the Firmware for the MiniMaker? I have the dv1MX0B000 too, and I want upgrade for use my Minimaker with Cura and without the original Filament. i'm on Windows and i don't understand the qt resource extractor, I' ve tested.

Is it possible, that anybody adds the Firmware from this beta to the XYZ Firmware Collection from Modfreakz?

Hi All

I have just got a Mini maker from a friend. I have download the software installation procedure 

https://xyzprod.blob.core.windows.net/d … er(EN).pdf

I get the error shown on the attached file when I try to run on Win 7 or Win 10.

Anybody got any ideas how to fix this

Many thanks

Update. Just tried it on another one of my windows 10 PC's and workked like a charm. Thanks all above for the info

I tried on my minimaker and completely works. For the correct working of "PrinterSNUpdateTool.exe", use it with "run as administrator" option on Windows10 PC. The real serial number is located on the label attached to the aluminum base, which can be seen when looking to the right of the printing table.

Thanks...

Just got a DaVinci Jr 1 (They were about to toss it), found this post, Tried to upgrade to 3.5.1 but I was able only to upgrade to 2.2.7, tried to follow the replies here but I don't quite understand, is it possible to to upgrade to 3.5.1 or not? Any clear instructions will be really appreciated.

As I wrote above, the firmware version 3.5.1 for da Vinci Jr 1 ("dv1J00A000") is embedded in the ”XYZprint R2.exe” file in the installed XYZprint R2 Beta 2.0.23:

You could extract it using any means and try to flash it using the ”XYZ Firmware Flash Tool” by Modfreakz.

If you don't know how to extract parts of a binary file, perhaps some Windows user could suggest a suitable program, like a hex editor, that could be used. Alternatively, if you have access to Unix like command line tools, as with WSL, you could do something like:

tail -c +11560680 "XYZprint R2.exe" | head -c 308944 >3F1J0_FW_V3_5_1.bin

Note that the offset to tail used this way may be 1-based, so you have to add one, as I did. The extracted file should start with "dv1J00A000+3.5.1".

If I click on a DaVinci model above, I get a PDF document with instructions on how to update the 3D printer to firmware 3.2.4

Is this official firmware/manual from XYZ-Printing, or is this an unofficial "community" project?

The firmware and instructions seem to be official from the last remnants of XYZ Printing.

However, it might be the case that the official instructions will not work for you. This could be because you, like me, have a “B” fingerprint model. But it could also be because of the serial number, as I’ve tried to explain above. Most likely, some of the approaches I outlined above could be used instead.

Hi everyone! I’m trying to flash OpenTag firmware on my XYZ da Vinci mini w+ (Telit version), but the firmware folder for my model seems to be empty or missing.
I’ve followed all the steps up to identifying my printer (dv1MW0C010), but now I’m stuck because I can’t find the actual .bin file.

Does anyone have a working copy of the 3.2.7 firmware for Telit-based models?
Or maybe there’s a mirror or archived link where I can download it?

Any help would be hugely appreciated! Thanks in advance.

Did you download XYZprint 2.1.2? If you unpack/install it you’ll find the XYZprint.exe. Embedded within it, you’ll find the firmware starting with ”dv1MW0C010+3.2.7”. It starts at offset 0x2D9DEAE (47832750) and is 2030656 (0x1EFC40) bytes long.

The original filename for the firmware is likely 3FM3W_10_FW_V3_2_7.bin.

Does anyone have a working copy of the 3.2.7 firmware for Telit-based models?
Or maybe there’s a mirror or archived link where I can download it?

Any help would be hugely appreciated! Thanks in advance.