<![CDATA[SoliForum - 3D Printing Community — Da Vinci 1.0A repetier flashing help?]]> https://www.soliforum.com/topic/18997/da-vinci-10a-repetier-flashing-help/ Tue, 05 Apr 2022 12:44:20 +0000 PunBB <![CDATA[Da Vinci 1.0A repetier flashing help?]]> https://www.soliforum.com/post/155283/#p155283 The process isn't working for me. Everything seems to work but the printer never resets and the screen stays as black bars.

I'm using arduinoIDE 1.8.19

and the github davinci 0.92 code and have set the config.h

The compile and upload works
 
Sketch uses 210316 bytes (40%) of program storage space. Maximum is 524288 bytes.
Atmel SMART device 0x285e0a60 found
Erase flash
done in 0.040 seconds

Write 213124 bytes to flash (833 pages)
[==============================] 100% (833/833 pages)
done in 99.668 seconds

Verify 213124 bytes of flash
[==============================] 100% (833/833 pages)
Verify successful
done in 66.101 seconds
Set boot flash true
CPU reset.


has anyone had this problem or offer advice?

]]> Tue, 05 Apr 2022 12:44:20 +0000 https://www.soliforum.com/post/155283/#p155283