https://www.soliforum.com/topic/18961/voltage-issue/ Mon, 10 Jan 2022 01:08:28 +0000 PunBB https://www.soliforum.com/post/155173/#p155173 That sounds like motor overload, could be things like thrust bearing failure, no thrust bearing lubrication, debris in barrel, wrong temperature for polymer, really anything that can result in excessive torque load.

]]> Mon, 10 Jan 2022 01:08:28 +0000 https://www.soliforum.com/post/155173/#p155173 https://www.soliforum.com/post/155119/#p155119 Hello. I've triple checked to make sure my stall protection board was correctly dialed in but what happens is this. I tried to start extruding and once some plastic fed into the barrel my volts seemed to drop to about 2 and would jump back to 11.8-12 just a couple times for a split second and go back to 2. What am I overlooking? Could this happen is my heater band is a bad spot and the plastic isn't melted all the way?

]]> Thu, 23 Dec 2021 07:27:24 +0000 https://www.soliforum.com/post/155119/#p155119