<![CDATA[SoliForum - 3D Printing Community — Glass thickness under LCD panel?]]> https://www.soliforum.com/topic/18958/glass-thickness-under-lcd-panel/ Sun, 29 May 2022 21:42:21 +0000 PunBB <![CDATA[Re: Glass thickness under LCD panel?]]> https://www.soliforum.com/post/155317/#p155317 Maybe something like this is what you need:

https://www.aliexpress.com/item/1005004182121729.html

]]> Sun, 29 May 2022 21:42:21 +0000 https://www.soliforum.com/post/155317/#p155317 <![CDATA[Re: Glass thickness under LCD panel?]]> https://www.soliforum.com/post/155107/#p155107 scratchbuild52 wrote:

Hi there,

       I am busy designing an SLA printer , I have all the electronics already to build my 6k 12.8" mono printer. I have a small problem with the LCD, it is only 1.25mm thick, so I need to put it on a piece of glass to support it. What is the thickest you can go with the glass?

I have a UV light source that is quite strong and that delivers the light at nearly perfect 90degree straight up. Does anybody have some input into my design please.

Regards

Nic

Most are usually two to three mm. There really should not be much force ever applied to the LCD.

]]> Fri, 17 Dec 2021 22:25:47 +0000 https://www.soliforum.com/post/155107/#p155107 <![CDATA[Glass thickness under LCD panel?]]> https://www.soliforum.com/post/155106/#p155106 Hi there,

       I am busy designing an SLA printer , I have all the electronics already to build my 6k 12.8" mono printer. I have a small problem with the LCD, it is only 1.25mm thick, so I need to put it on a piece of glass to support it. What is the thickest you can go with the glass?

I have a UV light source that is quite strong and that delivers the light at nearly perfect 90degree straight up. Does anybody have some input into my design please.

Regards

Nic

]]> Fri, 17 Dec 2021 09:30:51 +0000 https://www.soliforum.com/post/155106/#p155106