SoliForum - 3D Printing Community — Da Vinci Mini / Firmware

Re: Da Vinci Mini / Firmware

null@example.com (GerardDirks) — Sat, 13 Jun 2020 22:49:28 +0000

Take care off downgrading!

The Tags (also original) which works, will not work anymore after downgrading! If you have no tools to reprogram the Tags, take care. I lost my 3D printer!. None of the tools I have allowing reseting the Tags (even with Arduino Nano & PN532, only errors on Windows 7)

Re: Da Vinci Mini / Firmware

null@example.com (tosch448) — Sat, 13 Jun 2020 17:30:45 +0000

Hi,

Thank you very much, then I would rather leave my old firmware on it ...

Re: Da Vinci Mini / Firmware

null@example.com (GerardDirks) — Thu, 04 Jun 2020 09:36:19 +0000

Hello

I made the same mistake! I wouldn't suggest to update to 1.3.9. I was on 1.3.3 and since I have the latest version is installed, every second print has an error 0061. So leave it as it is.

Maybe you can install with the tools in this forum a version between 1.17 and 1.3.3, but never switch to 1.3.9

Gérard

Re: Da Vinci Mini / Firmware

null@example.com (tosch448) — Wed, 03 Jun 2020 07:34:46 +0000

Yes, it's working.

But the Firmware is very very old.

I think many Bugs were in it.

A new one, better performance, more combatibily...

Isn't this right ?

Re: Da Vinci Mini / Firmware

null@example.com (carl_m1968) — Tue, 02 Jun 2020 19:05:27 +0000

If your machine is working, why do you need to update? Never update unless you have to or need a feature in an update.

Da Vinci Mini / Firmware

null@example.com (tosch448) — Tue, 02 Jun 2020 18:50:31 +0000

Hi,

My new Da Vinci mini has the Firmware 1.1.7.
I use ntag213 to print with 3rd Filaments.

Can I update to Firmware 1.3.9 and use farther my ntag213 without Problems?

Thanks a lot.

(Sorry for my bad English)