https://www.soliforum.com/topic/18634/how-to-print-long-rod/ Fri, 29 May 2020 20:53:50 +0000 PunBB https://www.soliforum.com/post/153450/#p153450 As Tin said you will probably need to increase the base size by adding a brim then grinding it off once done.

]]> Fri, 29 May 2020 20:53:50 +0000 https://www.soliforum.com/post/153450/#p153450 https://www.soliforum.com/post/153449/#p153449 Add a brim. also you can try laying it down you may still need a brim

]]> Fri, 29 May 2020 19:55:17 +0000 https://www.soliforum.com/post/153449/#p153449 https://www.soliforum.com/post/153448/#p153448 I'm seeing failure when I'm trying to print a rod with 18mm diameter, 150mm long, the rod was printed 90mm long then falling down.
any suggestions?

]]> Fri, 29 May 2020 19:07:01 +0000 https://www.soliforum.com/post/153448/#p153448