<![CDATA[SoliForum - 3D Printing Community — Error Code 0061]]> https://www.soliforum.com/topic/18621/error-code-0061/ Sat, 23 May 2020 16:10:32 +0000 PunBB <![CDATA[Re: Error Code 0061]]> https://www.soliforum.com/post/153392/#p153392 I change the layer height to 0.1mm, and again error 0061

What the hell is happened here. Memory Error? No other Programms are open, only XYZPrint 2.0.1 on an iMac with 16Gb of RAM printing with USB ?!? Is the Memory of the da Vinci mini w is overflowed ???

http://soliforum.com/i/?HuE9nHK.png

Could this be an issue with the new firmware I installed 3 days ago, before I had 1.3.3 and this error never occurred!

]]> Sat, 23 May 2020 16:10:32 +0000 https://www.soliforum.com/post/153392/#p153392 <![CDATA[Error Code 0061]]> https://www.soliforum.com/post/153386/#p153386 Hello

Tonight I started a large Print (17 hours). The process was stopped with error 0061 after about printed 700 of 826 layers

http://soliforum.com/i/?UqLBVV5.png

The resolution was made with 0.05 layers and print extremly well.

I can't find  what error 0061 means? Any hints?

Gerard

]]> Sat, 23 May 2020 11:31:49 +0000 https://www.soliforum.com/post/153386/#p153386