SoliForum - 3D Printing Community — sos urgente

Re: sos urgente

null@example.com (capibara) — Fri, 15 May 2020 13:13:49 +0000

Yes, I have bought a few things from Print it industries for my SD4. If they had a bed sled or a heater for an SD2, I would buy it in a heartbeat!

Re: sos urgente

null@example.com (Kronikabuse) — Wed, 13 May 2020 12:22:26 +0000

www.printitindustries.com sells many parts for soildoodles

Re: sos urgente

null@example.com (Tin Falcon) — Wed, 13 May 2020 11:53:48 +0000

First of all take a breather and slow down on hitting the submit button You posted the same question 4 times.
So Please go back and delete the redundancy.
1) i do not know if solidoodle ever published an illustrated parts bulletin. And do not know if you know this but they went bankrupt IIRC 2 years ago. Most parts are available as the machine is open source. and some need to be 3 d printed. Check for solidoodle on thingiverse.
Most here use repitier host that has cura and sli3r built in.
there are other software options.

There are many you tube videos that should help you.

Hope this helps

you need a model
then it needs to be sliced (CAM) then run the g code.

before that make sure the machine is set up and tuned.

sos urgente

null@example.com (javiercifuentes) — Wed, 13 May 2020 03:49:33 +0000

good afternoon I would like to know 2 things a manual that specifies all the parts of solidoodle bombre of them to look for spare parts. and the second someone can help me I have tried to add support to the models but it does not accept changes. how to make a help with a manual or step-by-step video for this option to print with solidoodle. and if someone has used cure what would be the parameters to recognize the printer thanks