<![CDATA[SoliForum - 3D Printing Community — PLA+ vs tough PLA]]> https://www.soliforum.com/topic/18581/pla-vs-tough-pla/ Sun, 10 May 2020 23:09:42 +0000 PunBB <![CDATA[Re: PLA+ vs tough PLA]]> https://www.soliforum.com/post/153263/#p153263 You should be fine. compare the temperature specs on each roll.
I have a sample of PRO pla, basically the same as pla+ the only difference is the pro pla has a low temp of 210 instead of  200  you may need to boost temp 5 or 10 degrees. A different color can change temp that much.

IMHO try it and see you almost always need to adjust something with a new roll anyway.

]]> Sun, 10 May 2020 23:09:42 +0000 https://www.soliforum.com/post/153263/#p153263 <![CDATA[PLA+ vs tough PLA]]> https://www.soliforum.com/post/153246/#p153246 Does PLA+ use the same settings as Tough PLA
Ibought a roll of PLA+ to do some lithophanes but my ultimaker only has profiles for PLA and Tough PLA
can I use the Tough PLA profile or do i have to modify the PLA profile

Thanks
Dale

]]> Fri, 08 May 2020 23:50:21 +0000 https://www.soliforum.com/post/153246/#p153246