<![CDATA[SoliForum - 3D Printing Community — Can't calibrate.]]> https://www.soliforum.com/topic/18576/cant-calibrate/ Fri, 08 May 2020 16:12:11 +0000 PunBB <![CDATA[Re: Can't calibrate.]]> https://www.soliforum.com/post/153240/#p153240 I’m glad that you got it working and thank you for the feedback.  One inch is usually enough.  I’ll look into this issue more.

Uriah

]]> Fri, 08 May 2020 16:12:11 +0000 https://www.soliforum.com/post/153240/#p153240 <![CDATA[Re: Can't calibrate.]]> https://www.soliforum.com/post/153238/#p153238 Solved the problem. The card has to be considerably more than the 1" closer than center indicated in the doc.

]]> Fri, 08 May 2020 12:17:46 +0000 https://www.soliforum.com/post/153238/#p153238 <![CDATA[Can't calibrate.]]> https://www.soliforum.com/post/153223/#p153223 I recently built my Atlas 3D scanner and it just doesn't want to calibrate. Here's what the calibration card looks like on the scanner and on the screen:

http://soliforum.com/i/?hHbOGEn.jpg

http://soliforum.com/i/?UItKhnK.png

I've tried a bunch of different light amounts. My shop lighting is via LED tube type fixtures.

Here are my settings:

http://soliforum.com/i/?Kh8TTEz.jpg

Any ideas how to troubleshoot?

Thanks in advance,
Alan

]]> Wed, 06 May 2020 02:36:48 +0000 https://www.soliforum.com/post/153223/#p153223