https://www.soliforum.com/topic/18535/mini-w-failing-to-print/ Thu, 16 Apr 2020 08:16:46 +0000 PunBB https://www.soliforum.com/post/153027/#p153027 Hi folks
So I purchased a mini w+ and it has printed PPE quite happily for around 22 hours of printing. Now it craps out within about 15 seconds of initiating a print. The problem is the guide tube detaches itself from the feed module, see pic below. This happens no matter how firmly I fit the guide tube.  I thought maybe it was because the nozzle in the extruder module was blocked but I’ve cleaned it several times yet the problem occurs almost immediately on the first print run. Could it be a prob with the filament? It’s brand new straight out of the vacuum packaging. I need to get this back online to donate PPE so any help would be much appreciated.

]]> Thu, 16 Apr 2020 08:16:46 +0000 https://www.soliforum.com/post/153027/#p153027