SoliForum - 3D Printing Community — Da Vinci JR -> RAMPS 14

Re: Da Vinci JR -> RAMPS 14

null@example.com (tracks479) — Tue, 14 Apr 2020 09:44:58 +0000

I checked my connexions and all is ok.
I have the same vref in my configuration.h
I upload this video with my problem :
And this is my configuration.h

https://www.dropbox.com/s/k3xjwirgkdwx6 … ion.h?dl=0

Re: Da Vinci JR -> RAMPS 14

null@example.com (carl_m1968) — Mon, 13 Apr 2020 16:42:35 +0000

Motor phases are wired wrong. They are marked on the output ports of the board. Make sure they match on the motor
Your vref could also be low for those motors. If you have an axis that works then wire all axis like that one and set the vref for all to the same as the working axis.

Da Vinci JR -> RAMPS 14

null@example.com (tracks479) — Sun, 12 Apr 2020 19:19:30 +0000

Hi,
Before anything else i'm sorry for my english because i'm a french student and for my personnal issues i'm converting my DA VINCI JR 1.0 printer to RAMPS.
After many times i didn't solve my problems;
When i'm trying to move the Z stepper motor or the X stepper motor, there are "shaking", anything move and it's causing a lot of noise.
For the moment, i reached the forum for a solution and i didn't find it...
Could you help me ? Thank's

I'm using Marlin V1.1.5