<![CDATA[SoliForum - 3D Printing Community — 1.0a Nozzle heater]]> https://www.soliforum.com/topic/18520/10a-nozzle-heater/ Thu, 30 Apr 2020 03:11:01 +0000 PunBB <![CDATA[Re: 1.0a Nozzle heater]]> https://www.soliforum.com/post/153146/#p153146 thanks for the reply and tip. I'll check out other heaters.
Pete

]]> Thu, 30 Apr 2020 03:11:01 +0000 https://www.soliforum.com/post/153146/#p153146 <![CDATA[Re: 1.0a Nozzle heater]]> https://www.soliforum.com/post/153144/#p153144 The stock heater is 12V 35 Watts; I run an Amazon purchased China produced one and have sustained 260 Celsius on a V6 clone with a silicone sock.

One trick I do with my hotend is to coat the heater with a thin coating of Arctic Silver 5 or Grizzly Kryonaut thermal compound for the most efficient heat transfer before inserting into the heater block.

]]> Thu, 30 Apr 2020 00:50:59 +0000 https://www.soliforum.com/post/153144/#p153144 <![CDATA[1.0a Nozzle heater]]> https://www.soliforum.com/post/152963/#p152963 On my Da Vinci 1.0a the nozzle heater died so I replaced it with a generic 1 from my prussa knockoff but it seems not to get to temp sometimes when printing ABS. Is their nozzle heater different to the rest? Any tips re replacement?
Pete

]]> Fri, 10 Apr 2020 03:37:22 +0000 https://www.soliforum.com/post/152963/#p152963