SoliForum - 3D Printing Community — bracket bad.... it is breaking down.

Re: bracket bad.... it is breaking down.

null@example.com (nfhill) — Sat, 30 Mar 2013 07:15:26 +0000

CA is short for cyanoacrylate glue, AKA super glue.

Re: bracket bad.... it is breaking down.

null@example.com (algosuk) — Thu, 28 Mar 2013 10:31:23 +0000

thank you for the photo Schieggster
CA is cianoacrilic glue i dare say? i will put some of course
i dont know about misumi catalogue... we use yellow pages for those duty

Re: bracket bad.... it is breaking down.

null@example.com (kkciampa) — Thu, 28 Mar 2013 02:58:33 +0000

Easy fix...

1) Order the latest Misumi catalogue
2) place it on bed.
3) Then call SD and tell them it fell apart and you need a new one.
4)

Re: bracket bad.... it is breaking down.

null@example.com (nfhill) — Wed, 27 Mar 2013 20:48:23 +0000

Get some thin CA glue. Hold the pieces securely together and add a few drops of CA. Thin CA will wick into the crack and it should be as strong, or stronger, as new. We model airplane builders have been doing this sort of thing for many years. As long as there is no oil/grease in the crack, the CA will bond it together.

Re: bracket bad.... it is breaking down.

null@example.com (Schieggster) — Wed, 27 Mar 2013 13:32:49 +0000

algosuk wrote:

it'is a solidoodle 2, by now they will not make a change untill " the platform has been dropping at all "
schieggerter have you some photo of your bed ?
thank you!

Personally I would use a mending plate to hold it in place, but I don't understand how you could design something like that and intend it support anything let alone it's own weight. It seems they've fixed this in the later versions ( I.E. Mine) but a metal bed support might be even better.

I'll try to get better picture later, but you can see the curves of those pieces on the sides...

Re: bracket bad.... it is breaking down.

null@example.com (algosuk) — Wed, 27 Mar 2013 13:13:23 +0000

it'is a solidoodle 2, by now they will not make a change untill " the platform has been dropping at all "
schieggerter have you some photo of your bed ?

thank you!

Re: bracket bad.... it is breaking down.

null@example.com (Schieggster) — Tue, 26 Mar 2013 14:45:34 +0000

On my bed it seems to have pieces that curve right there to avoid the cracking... I hope they send you a new bed support like mine.

Re: bracket bad.... it is breaking down.

null@example.com (kkciampa) — Tue, 26 Mar 2013 02:24:51 +0000

SD3?

Re: bracket bad.... it is breaking down.

null@example.com (cmetzel) — Mon, 25 Mar 2013 16:05:25 +0000

That's messed up, I would ask Solidoodle for a replacement right away because you never know when it's going to fail on you.

bracket bad.... it is breaking down.

null@example.com (algosuk) — Mon, 25 Mar 2013 15:53:38 +0000

hi i have this little problem:

i will put some stirrup in aluminum but seem very strange.
the first thing that i did is to check if Z securty screw was ok and it is @ the right height.