<![CDATA[SoliForum - 3D Printing Community — SABIC MG47F ?]]> https://www.soliforum.com/topic/18457/sabic-mg47f/ Mon, 01 Jul 2024 21:13:05 +0000 PunBB <![CDATA[Re: SABIC MG47F ?]]> https://www.soliforum.com/post/155724/#p155724 genesat1 wrote:

Melt flow is lower so it would extrude slower, but it should still be usable for filament extrusion.  I can’t guarantee it since I haven’t used this specific type, but in general ABS is the easiest to extrude.

The filament is indeed slow to extrude and difficult to print with, I found that adding colorant increases the melt flow rate, and improves the print quality, in case anyone wants to try it, when colored give very good quality filament, photos and details Here

]]> Mon, 01 Jul 2024 21:13:05 +0000 https://www.soliforum.com/post/155724/#p155724 <![CDATA[Re: SABIC MG47F ?]]> https://www.soliforum.com/post/152740/#p152740 Melt flow is lower so it would extrude slower, but it should still be usable for filament extrusion.  I can’t guarantee it since I haven’t used this specific type, but in general ABS is the easiest to extrude.

]]> Wed, 11 Mar 2020 18:45:12 +0000 https://www.soliforum.com/post/152740/#p152740 <![CDATA[Re: SABIC MG47F ?]]> https://www.soliforum.com/post/152715/#p152715 Forum search "MG47" = no cat in the horizon

google search http://www.soliforum.com/topic/14945/abs-mg47-cycolac/

]]> Thu, 05 Mar 2020 04:56:08 +0000 https://www.soliforum.com/post/152715/#p152715 <![CDATA[SABIC MG47F ?]]> https://www.soliforum.com/post/152711/#p152711 I would like to know whether SABIC MG47F ABS works for extrusion and 3D printing as MG94 ?

comparison here :

https://www.sabic.com/en/products/compa … 0c2926daac

min Qt to buy is 25kg that's why i'm asking before buying.

]]> Wed, 04 Mar 2020 14:34:16 +0000 https://www.soliforum.com/post/152711/#p152711