<![CDATA[SoliForum - 3D Printing Community — i updated mini w and i cant print anything]]> https://www.soliforum.com/topic/18440/i-updated-mini-w-and-i-cant-print-anything/ Thu, 27 Feb 2020 16:10:28 +0000 PunBB <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152679/#p152679 I had your problem and Modfreakz stayed with me and fixed the problem. Now my mini w is working like a charm! Yes the EMU Tag from him does work! Don't get frustrated like I did , it will all work out but follow modfreakzs instructions.

]]> Thu, 27 Feb 2020 16:10:28 +0000 https://www.soliforum.com/post/152679/#p152679 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152655/#p152655 am cool, thanks for the replies.

]]> Tue, 25 Feb 2020 08:17:48 +0000 https://www.soliforum.com/post/152655/#p152655 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152652/#p152652 ebsigma wrote:

And there is no way to change the id and pasw to the original tag? if you can not and buy ntag 213 of paper, I can change the id to these or they are only for use with an own unchangeable id

tags can only be used once then throw away. They all have a unique serial number that cannot be changed but the machine does remember up to 100. So if you saved them once you hit 100 you could use number 1 again.

]]> Tue, 25 Feb 2020 00:12:12 +0000 https://www.soliforum.com/post/152652/#p152652 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152649/#p152649 And there is no way to change the id and pasw to the original tag? if you can not and buy ntag 213 of paper, I can change the id to these or they are only for use with an own unchangeable id

]]> Mon, 24 Feb 2020 20:54:22 +0000 https://www.soliforum.com/post/152649/#p152649 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152647/#p152647 ebsigma wrote:

yes , I was referring to being able to reuse the original tag of a cartridge, the emutag works well for me, it failed me for some incorrect ID parameter or similar but it already works for me.

You cannot reuse a tag. Once a tag serial number has been seen as empty it is remembered by the machine and can never be reused.

]]> Mon, 24 Feb 2020 18:15:36 +0000 https://www.soliforum.com/post/152647/#p152647 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152646/#p152646 yes , I was referring to being able to reuse the original tag of a cartridge, the emutag works well for me, it failed me for some incorrect ID parameter or similar but it already works for me.

]]> Mon, 24 Feb 2020 16:57:17 +0000 https://www.soliforum.com/post/152646/#p152646 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152644/#p152644 The Emutag works for 100%

Maybe the batteries are empty? remove them and use external power.

]]> Mon, 24 Feb 2020 14:55:05 +0000 https://www.soliforum.com/post/152644/#p152644 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152642/#p152642 i have a new problem...

yesterday the printer work fine, but today I tried to print and if I put the original tag reset the filament meters I miss error 020A and if I put the emutag does not recognize me Well, he recognizes me but when I give him a print he doesn't print, he turns on the red light and tells me that the cartridge doesn't recognize him.... any advice?

update-the problem is that I was using a code in the emutag with some error, I have put another one and it is going well, but I would like to use the original tag with the android app to reload it but it does not work anymore ... I can reload it (I have the that comes with the 100 m printer) but the printer jumps error when I print it.

]]> Mon, 24 Feb 2020 08:59:47 +0000 https://www.soliforum.com/post/152642/#p152642 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152628/#p152628 ok thz, actually i use the oficial software... it is better cura?

]]> Sun, 23 Feb 2020 14:43:07 +0000 https://www.soliforum.com/post/152628/#p152628 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152627/#p152627 You are welcome!

If I understand your question correct!
I'm not very familiar with this topic, but the latest firmware version should support Cura.

Read the original release notes of the v1.3.6 firmware, it describe a lot!

https://xyzprod.blob.core.windows.net/f … 01.3.6.pdf


New Features and Improvements:
1. Fix WiFi connectivity bug
2. Support printing with CURA (Third-party Software Ultimaker Cura Direct Printing)

]]> Sun, 23 Feb 2020 14:36:36 +0000 https://www.soliforum.com/post/152627/#p152627 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152626/#p152626 ok i repeat all process,My two failures were not cutting the cable splice and not using a custom firm with my serial number ... now it turns on and detects it, one last question, with the firm atmel dump can I load the file that generates a cure?

muchisimas gracias a todos!!!!
very very thankyou to all!!!!

]]> Sun, 23 Feb 2020 12:06:00 +0000 https://www.soliforum.com/post/152626/#p152626 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152625/#p152625 Hi,

1. you make the joint of the two welded points
2. turn on the printer and wait 5 seconds
3. turn off the printer and remove the joint of the two welded points
4. turn the prinder on again, the device manager will detect the BOSSA device at some COM port
5. now use the program XYZ_Firmware_Converter to add your serialnumber inside the Atmel dump (dv1MW0A000+1.3.1_Atmel_dump.bin)
6. then use the XYZ_Firmware_Flash_Tool and flash that file to the firmware
7. turn off and on the printer, the device manager should detect the XYZ davinci printer.


Let me know at which point you stuck?!

]]> Sun, 23 Feb 2020 11:50:26 +0000 https://www.soliforum.com/post/152625/#p152625 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152624/#p152624 I just did the process with bossa, it connects it recognizes me, the signature is erased and the new one is saved (I don't know if I have to remove the joint at the two welded points) but it remains the same, the process is completed correctly but the printer still unanswered, background noise is heard but the LED does not turn on
the file i uploaded is
dv1MW0A000+1.3.1_Atmel_dump.bin

]]> Sun, 23 Feb 2020 11:38:49 +0000 https://www.soliforum.com/post/152624/#p152624 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152623/#p152623 yes, thats why I say to you to, please follow the link and use the BOSSA recovery mode!

]]> Sun, 23 Feb 2020 11:23:58 +0000 https://www.soliforum.com/post/152623/#p152623 <![CDATA[Re: i updated mini w and i cant print anything]]> https://www.soliforum.com/post/152622/#p152622 thz But the printer does not turn on, the LED is off and makes a constant noise so it does not detect the USB either

]]> Sun, 23 Feb 2020 10:38:13 +0000 https://www.soliforum.com/post/152622/#p152622