<![CDATA[SoliForum - 3D Printing Community — Day vinci 1.0 pro control board replacement]]> https://www.soliforum.com/topic/18331/day-vinci-10-pro-control-board-replacement/ Mon, 16 Dec 2019 01:23:01 +0000 PunBB <![CDATA[Re: Day vinci 1.0 pro control board replacement]]> https://www.soliforum.com/post/152183/#p152183 IMHO not a whole lot of user replaceable parts. Likely the only replacements available is from someone who upgraded to an open source board. Or you can purchase a opensource board but you will not have the 3 in 1 capability.

]]> Mon, 16 Dec 2019 01:23:01 +0000 https://www.soliforum.com/post/152183/#p152183 <![CDATA[Re: Day vinci 1.0 pro control board replacement]]> https://www.soliforum.com/post/152125/#p152125 http://soliforum.com/i/?AFHnkjz.jpg

]]> Sun, 08 Dec 2019 15:44:36 +0000 https://www.soliforum.com/post/152125/#p152125 <![CDATA[Day vinci 1.0 pro control board replacement]]> https://www.soliforum.com/post/152124/#p152124 When trying to find out why my extruder wasn't heating up and looking to test the right fuse, I shorted my board. It pops up as if the firmware was wiped, doesn't show up in my computer as connected and the fan runs at top speed. I believe the board is done and I just want to place it with one that do the same as the one I currently have but maybe better.

I have a day vinci pro 1.0 with laser optional attachment. ( appears to use the same board as a 3 in 1)

Any help or suggestion would be appreciated attached is a photo of my control board.

]]> Sun, 08 Dec 2019 15:43:03 +0000 https://www.soliforum.com/post/152124/#p152124