No Smart Tag users out there? I bought one for $50 and it works like charm with any PLA on my $150 for the da Vinci mini Maker.  No more messing with / buying NFC tags. 

I must be one of the lucky ones - unlike others, I've had no issues with the printer (even after firmware upgrades) once I learned how to tweak parameters.  And recently with firmware upgrade, you can print from Cura.

You are probably one of the few that still has theirs. The print volume on all of their machines is just too small.

I must be one of the lucky ones - unlike others, I've had no issues with the printer (even after firmware upgrades) once I learned how to tweak parameters.  And recently with firmware upgrade, you can print from Cura.

been printing with the same nfc chip for over two months now and it shows 199/200 because i tried a very small test print from the sd card, ditched xyzprint once i found it never changed and finally decided to ditch the stock nfc/spool holder as well.

been running multiple spools of solutech filament, nearly finished off the xyz filament the chip came with.