https://www.soliforum.com/topic/18132/using-repetier-as-a-cnc-program/ Fri, 12 Jul 2019 03:32:45 +0000 PunBB https://www.soliforum.com/post/150858/#p150858 I was hoping for an easy way, but I will do that.  Thank you!

]]> Fri, 12 Jul 2019 03:32:45 +0000 https://www.soliforum.com/post/150858/#p150858 https://www.soliforum.com/post/150835/#p150835 you would have to make changes to the firmware to completely eliminate the temp issue.
Just plug a thermistor into the board - it will be happy. it does not actually need to be run anywhere, just plug it in

]]> Wed, 10 Jul 2019 11:23:05 +0000 https://www.soliforum.com/post/150835/#p150835 https://www.soliforum.com/post/150828/#p150828 Thanks, I had the temps set to zero already, but I can't find any menu item where I can remove the extruder and bed in Repetier v2.1.6

]]> Tue, 09 Jul 2019 23:59:25 +0000 https://www.soliforum.com/post/150828/#p150828 https://www.soliforum.com/post/150826/#p150826 Just remove the bed and extruder in the machine settings and make sure any temps are set to zero.

]]> Tue, 09 Jul 2019 19:56:00 +0000 https://www.soliforum.com/post/150826/#p150826 https://www.soliforum.com/post/150822/#p150822 Need a little help.  I am converting my 3D printer into a Engraving machine (CNC) and Repetier won't send to printer until there is a temperature value for the extruder and bed.  Which I want to disconnect.  I used the CNC setting in Repetier and still makes no difference.  Is there a setting I can change so that the temps are not required to print?  or is there a better program to use for a CNC 3D printer machine?

]]> Tue, 09 Jul 2019 19:09:48 +0000 https://www.soliforum.com/post/150822/#p150822