<![CDATA[SoliForum - 3D Printing Community — Minimaker power adapter]]> https://www.soliforum.com/topic/18111/minimaker-power-adapter/ Sun, 23 Jun 2019 19:57:20 +0000 PunBB <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150738/#p150738 Tin Falcon wrote:

looks like you are going o have to rewire the output cable

He did, he said it works now..

]]> Sun, 23 Jun 2019 19:57:20 +0000 https://www.soliforum.com/post/150738/#p150738 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150737/#p150737 looks like you are going o have to rewire the output cable

]]> Sun, 23 Jun 2019 18:40:34 +0000 https://www.soliforum.com/post/150737/#p150737 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150735/#p150735 I went with a  Magnavox tv adapter..its 6 amp so has plenty of current.this thing screams now as i was using a 19v 3amp laptop adapter temporarily.

$15 shipped out the door.

https://www.ebay.com/itm/OEM-Genuine-MA … Swde1c--Th

]]> Sun, 23 Jun 2019 05:51:56 +0000 https://www.soliforum.com/post/150735/#p150735 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150715/#p150715 You may want to go with something like this

https://www.ebay.com/itm/SUPERNIGHT-24V … SwEeFVU65-


You will need to wire it up with a   input and outut power cord.

]]> Thu, 20 Jun 2019 23:08:22 +0000 https://www.soliforum.com/post/150715/#p150715 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150710/#p150710 Just an FYI. If you have a hard time finding one that does 2.5 amps you can go higher and in fact should. 2.5 is most likely the minimum the machine will work with. Personally I go 5 amps minimum just for some overhead.

]]> Thu, 20 Jun 2019 10:24:32 +0000 https://www.soliforum.com/post/150710/#p150710 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150709/#p150709 Yeah i figured it out a couple of days ago. Most of the power supplys i found online have the dang stats blurred out.

Its 24v 2.5amps and center positive if anyone needs the info in the future..

]]> Thu, 20 Jun 2019 06:26:57 +0000 https://www.soliforum.com/post/150709/#p150709 <![CDATA[Re: Minimaker power adapter]]> https://www.soliforum.com/post/150691/#p150691 www.ebay.com/itm/AC-Adapter-for-XYZprin … 21225194322

looks to be 24 volts center positive

]]> Tue, 18 Jun 2019 01:12:19 +0000 https://www.soliforum.com/post/150691/#p150691 <![CDATA[Minimaker power adapter]]> https://www.soliforum.com/post/150687/#p150687 Can anyone please post a lable picture of the power box that plugs into the wall and then into the minimaker?? I picked one up used without the power adapter and i can't find a picture online with the original specs(output volts,amps,and plug Polarity)

]]> Mon, 17 Jun 2019 04:26:33 +0000 https://www.soliforum.com/post/150687/#p150687