<![CDATA[SoliForum - 3D Printing Community — Da Vinci 1.0 Pro circuit board needed from filament drive assembly]]> https://www.soliforum.com/topic/17751/da-vinci-10-pro-circuit-board-needed-from-filament-drive-assembly/ Wed, 28 Nov 2018 13:42:58 +0000 PunBB <![CDATA[Re: Da Vinci 1.0 Pro circuit board needed from filament drive assembly]]> https://www.soliforum.com/post/147676/#p147676 Looking at it it looks like Molex PICOBLADE 53048 which are readily available from RS Components along with a 50mm cable which I've just order for just over £5.

It's finding someone suitably qualified and equiped to do the repair without unwittingly trusting it to some hobbiest that advertises pcb repairs in his shed as it's a very minute connection on the board.

http://soliforum.com/i/?qwRsIqB.jpg

[Update] XYZ have agreed to replace the parts so either way I'll be back up and running in days or weeks.

]]> Wed, 28 Nov 2018 13:42:58 +0000 https://www.soliforum.com/post/147676/#p147676 <![CDATA[Re: Da Vinci 1.0 Pro circuit board needed from filament drive assembly]]> https://www.soliforum.com/post/147672/#p147672 It would probably be easier to source the connector and just replace it. Unless somebody is gutting and/or scrapping a printer you can't just get one of these boards. I would try to source the connector.

]]> Wed, 28 Nov 2018 12:49:35 +0000 https://www.soliforum.com/post/147672/#p147672 <![CDATA[Da Vinci 1.0 Pro circuit board needed from filament drive assembly]]> https://www.soliforum.com/post/147671/#p147671 Does anyone have this circuit board for sale new/old as long as its working.
It fits just above the filament drive unit and attaches with a 2" 3pin cable to the drive sensor.


http://soliforum.com/i/?dPYs6RS.jpg

]]> Wed, 28 Nov 2018 12:41:38 +0000 https://www.soliforum.com/post/147671/#p147671