<![CDATA[SoliForum - 3D Printing Community — Davinci minimaker will not connect]]> https://www.soliforum.com/topic/17728/davinci-minimaker-will-not-connect/ Sat, 15 May 2021 20:49:06 +0000 PunBB <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/154774/#p154774 Hello,
I have exactly the same issue.
Impossible to connect whatever the USB port I select, even with the software at the last issue.
Any idea?
Brian did you find a solution?

]]> Sat, 15 May 2021 20:49:06 +0000 https://www.soliforum.com/post/154774/#p154774 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147981/#p147981 For error 40  in xyz da Vinci printer it really helps to remove the sd card from the back of the printer but it is not enough.
For solve this problem you have to bend the plate holding the SD card.
I have also cleaned the alcohol contacts.
In my case there were 5 files on the card: CMD_log.txt; filename.txt and 3 models with 3w extension.
http://soliforum.com/i/?lCKYGqw.jpg

]]> Mon, 17 Dec 2018 08:08:29 +0000 https://www.soliforum.com/post/147981/#p147981 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147551/#p147551 Try updating the printer drivers, via the software update IIRC.

]]> Thu, 22 Nov 2018 15:07:43 +0000 https://www.soliforum.com/post/147551/#p147551 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147506/#p147506 Okay i will contact the company. So i will buy now a good 3d printer.

]]> Mon, 19 Nov 2018 14:23:22 +0000 https://www.soliforum.com/post/147506/#p147506 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147505/#p147505 brian.van.steijn wrote:

it's not working. I will contact XYZ and send it back to the factory.

Brace yourself. They are going to ask you to return it at your cost to Taiwan most likely. They do not pay for returns even for defective units.

]]> Mon, 19 Nov 2018 13:59:06 +0000 https://www.soliforum.com/post/147505/#p147505 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147504/#p147504 it's not working. I will contact XYZ and send it back to the factory.

]]> Mon, 19 Nov 2018 13:27:59 +0000 https://www.soliforum.com/post/147504/#p147504 <![CDATA[Re: Davinci minimaker will not connect]]> https://www.soliforum.com/post/147502/#p147502 move the printer to a different usb port, this will make it re-install the driver.

]]> Mon, 19 Nov 2018 13:04:20 +0000 https://www.soliforum.com/post/147502/#p147502 <![CDATA[Davinci minimaker will not connect]]> https://www.soliforum.com/post/147459/#p147459 Hello,

Everything was working fine until some days ago were XYZWare couldn't find my printer anymore. https://imgur.com/ohpxGZ1
My printer turns on ok : https://imgur.com/kYLMSuT
Windows recognizes the printer : https://i.imgur.com/FvsumkL.png and is on the right COM. There a little yellow sign but it said it couldn't find any error.

I've tried to unplug every usb that was connected to my computer. It didn't change anything. I've also tried to reinstall XYZWare, no result. Turning off and on my computer or my printer doesn't help.

It may be a driver issue? But I can't find them anywhere.. I don't know what to do

]]> Fri, 16 Nov 2018 18:35:24 +0000 https://www.soliforum.com/post/147459/#p147459