<![CDATA[SoliForum - 3D Printing Community — Why does heater now turn off?]]> https://www.soliforum.com/topic/17603/why-does-heater-now-turn-off/ Tue, 18 Sep 2018 20:49:07 +0000 PunBB <![CDATA[Re: Why does heater now turn off?]]> https://www.soliforum.com/post/146368/#p146368 Ski52 wrote:

Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

I thought this sounded familiar:
Yes, it was your original post verbatim:
http://www.soliforum.com/topic/17380/wh … -turn-off/

]]> Tue, 18 Sep 2018 20:49:07 +0000 https://www.soliforum.com/post/146368/#p146368 <![CDATA[Re: Why does heater now turn off?]]> https://www.soliforum.com/post/146367/#p146367 Ski52 wrote:

Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

Please post your END G-code.

]]> Tue, 18 Sep 2018 20:42:14 +0000 https://www.soliforum.com/post/146367/#p146367 <![CDATA[Re: Why does heater now turn off?]]> https://www.soliforum.com/post/146366/#p146366 Did we copy verbatim my original post? 

If so, if you read on, you will find I solved all the probs with a retrograde instead of an upgrade. 

Good luck.


2018-06-04 22:34:29

    Ski52
    Member
    Online

    From: Florida USA
    Registered: 2013-10-23
    Posts: 262

Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater.
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanx
Ski

]]> Tue, 18 Sep 2018 20:16:46 +0000 https://www.soliforum.com/post/146366/#p146366 <![CDATA[Re: Why does heater now turn off?]]> https://www.soliforum.com/post/146362/#p146362 Within RH, go to Slic3r Configuration...under Settings/Printer Settings/General, uncheck the box that says "Has heated bed:"

This should disable the script that shuts the bed heater.

]]> Tue, 18 Sep 2018 17:37:10 +0000 https://www.soliforum.com/post/146362/#p146362 <![CDATA[Re: Why does heater now turn off?]]> https://www.soliforum.com/post/146357/#p146357 Check program finish script

]]> Tue, 18 Sep 2018 15:37:17 +0000 https://www.soliforum.com/post/146357/#p146357 <![CDATA[Why does heater now turn off?]]> https://www.soliforum.com/post/146356/#p146356 Just upgraded Repetier-Host to the latest  V2.1.2.  Now the heat bed turns off when the print is finished.  The box in Printer Settings remains unchecked as it always has been.  It is somewhat annoying, cuz the heater I use now takes ~20 min to get to 65, and 40 - 45 min to get to 95.  I have always turned off the extruder, but never the heater. 
Is this a RH problem or is it  something else?  I have made no changes to the machine or soft/firmware, just the RH upgrade.

SD2 - almost everything modified

Thanks

]]> Tue, 18 Sep 2018 15:35:33 +0000 https://www.soliforum.com/post/146356/#p146356