https://www.soliforum.com/topic/17372/help-with-my-davinci-10/ Fri, 01 Jun 2018 01:02:10 +0000 PunBB https://www.soliforum.com/post/144236/#p144236 Thank you I will definitely check wiring  tonight  when I get home!

]]> Fri, 01 Jun 2018 01:02:10 +0000 https://www.soliforum.com/post/144236/#p144236 https://www.soliforum.com/post/144234/#p144234 For davinci 1.0, the wire harness cause the majority of the problem. When the wire bent to certain angle as the printing going through, the connect is not solid anymore. Check if the extruder step motor still turning and the cooling fan still running when it stop extruding plastic. Usually the problem will become better or worse after you mess with the wire harness and it is recommended to replace with better wire to fix it for once and all.

]]> Thu, 31 May 2018 21:45:20 +0000 https://www.soliforum.com/post/144234/#p144234 https://www.soliforum.com/post/144231/#p144231 I bought this used it came with repetier installed, anytime I try printing something over 2 inches the extruder stops printing but the motors are still going through the motion of printing? It prints smaller items fine even larger items as long as they are not tall, but once it hits a certain height it stops extruding plastic. Any ideas?

]]> Thu, 31 May 2018 16:51:15 +0000 https://www.soliforum.com/post/144231/#p144231