<![CDATA[SoliForum - 3D Printing Community — Are PLA temps rivaling ABS]]> https://www.soliforum.com/topic/17350/are-pla-temps-rivaling-abs/ Thu, 24 May 2018 01:12:22 +0000 PunBB <![CDATA[Re: Are PLA temps rivaling ABS]]> https://www.soliforum.com/post/144127/#p144127 Hmm i use the low to mid range on PLA and print with e3d hot ends.

]]> Thu, 24 May 2018 01:12:22 +0000 https://www.soliforum.com/post/144127/#p144127 <![CDATA[Re: Are PLA temps rivaling ABS]]> https://www.soliforum.com/post/144126/#p144126 I use inland PETG and even though my hotend and thermocouples are accurate I have to set it for about 20 above the recommended setting on the box. I never noticed with PLA as I now use PETG exclusively.

]]> Thu, 24 May 2018 01:07:46 +0000 https://www.soliforum.com/post/144126/#p144126 <![CDATA[Are PLA temps rivaling ABS]]> https://www.soliforum.com/post/144125/#p144125 It seemed to me that hat PLA formulation is slowly changing and the printing temps are slowly rising.
This is likely casual observation rather than totally scientific. And is based on one brand inland from micro center.

One empty roll is marked 190-220c  and there are several rolls marked 205- 225 c and my latest is over marked 215 -225.

I know just the color can make a difference but is seems like every time i by a new roll the temperature increases.

Curious does anyone else have similar experience with there favorite pla brand.

]]> Thu, 24 May 2018 00:20:21 +0000 https://www.soliforum.com/post/144125/#p144125