SoliForum - 3D Printing Community — trying to start scanner after long time to update

Re: trying to start scanner after long time to update

null@example.com (carl_m1968) — Sat, 23 Jun 2018 10:35:59 +0000

Then you are screwed unless you buy a keyboard and monitor. They are necessary when setting up a Pi. Or take it to friends house that has a keyboard monitor.

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Sat, 23 Jun 2018 06:26:03 +0000

I us Thinkpads/laptops

Re: trying to start scanner after long time to update

null@example.com (carl_m1968) — Thu, 21 Jun 2018 18:06:08 +0000

n2ri wrote:

hairu526 wrote:
Hi n2ri,
If you attach a USB keyboard an HDMI monitor to the Pi and boot it, does it take you to a login screen?
Regards,
Uriah
dont have those so...

Unless you have an ancient PC you have a USB keyboard and like JZ said most modern televisions have an HDMI input since nearly all DVD and Blueray players now output on HDMI.

Re: trying to start scanner after long time to update

null@example.com (jz) — Thu, 21 Jun 2018 18:02:04 +0000

check your TV, most of them have HDMI

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Thu, 21 Jun 2018 16:41:14 +0000

hairu526 wrote:

Hi n2ri,
If you attach a USB keyboard an HDMI monitor to the Pi and boot it, does it take you to a login screen?
Regards,
Uriah

dont have those so...

Re: trying to start scanner after long time to update

null@example.com (hairu526) — Tue, 19 Jun 2018 22:53:10 +0000

Hi n2ri,

If you attach a USB keyboard an HDMI monitor to the Pi and boot it, does it take you to a login screen?

Regards,
Uriah

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Sun, 10 Jun 2018 04:46:55 +0000

hairu526 where are you? need help here getting reconnected with my scanner so I can update it and put new lasers on etc. also gotta repair my printer so I can try using both again. been so long I have changed internet providers 3x since.

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Wed, 30 May 2018 08:28:52 +0000

how do I allow more time in browser before timeout? seems scanner is very slow and just starts to respond when timed out

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Wed, 30 May 2018 08:25:12 +0000

also seems a poor connection between scanner power switch and power jack as its erratic when plugged in or bumped/twisted since new like power supply was. cheap components are like that over 50% are bad.

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Wed, 30 May 2018 07:48:15 +0000

yeah tried the association thing but the atlas startup app uses another app to boot and no way to set what I cant identify seems its built into the atlas app which looks like a Dos file. my computer and AV has IE mostly disabled so dont know how its being used as if in background. power supply is just a cheap wallwart that plugs into port in atlas to power PI and Atlas laser board. got new replacement due to poor cord connection but they are the $1 China things. but yeah power is an issue on these. that propitiatory OS that runs the scanner is also iffy often as its some Linux based thing loaded on micro SD. but must get it to logon to update OS online so dead end ATM. I can plug same address in firefox but same results. dont know why the scanner maker hasnt replied to this topic. this is his thread.

Re: trying to start scanner after long time to update

null@example.com (carl_m1968) — Mon, 28 May 2018 12:15:48 +0000

My SLA printer runs on a Pi and does some similar stuff if the power supply is weak. Seems those supplies that plug into the USB port go bad often. They also must supply 3 amps minimum or it will cause boot problems.

The computer is what is causing the opening of IE. You need to associate what ever you click on to open atlas to Firefox instead of IE.

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Mon, 28 May 2018 06:39:44 +0000

so thats for my new internet provider login, does it have to login just to patch through router to my PC? Charter dont furnish router so I put Router between PC either-net and modem as I have Smart TV/Roku/WIFI also on router.
how do I make it use firefox instead of internet explorer? & Thanks BTW!

also the SD card is not even recognized by PC due to different format. the atlas run file has a place to input WIFI name/password and supposed to have thumb drive plugged in PC then click save and transfer thumb drive to PI USB slot to load it but when I do that it still uses IE and fails to open. if I copy the address in IE address line and past it in firefox same result just times out and cant connect. cant tell if anything is doing as it should with the odd USB drive data save/move. lights on PI blink a bit then NADA. I had no issue logging in before through either cable but WIFI was too slow on this old PI model. so does WIFI login also get used when direct cable to router? the drop down menu for details in the ATLAS3D_Windows.hta app shows text similar like you said but different things listed like

{
FreeLSS Version: FreeLSS 1.14

Network Devices:
wlan0: 0.0.0.0
lo: 127.0.0.1
eth0: 192.168.10.10

Kernel: Linux 4.1.7+ #817 PREEMPT Sat Sep 19 15:25:36 BST 2015 armv6l

lsusb:
Bus 001 Device 005: ID 154b:005b PNY
Bus 001 Device 004: ID 0bda:8179 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. LAN9500 Ethernet 10/100 Adapter / SMSC9512/9514 Hub
}

etc. have no clue what its for nor do I want to change any of it with my zero knowledge of it.

Re: trying to start scanner after long time to update

null@example.com (carl_m1968) — Sat, 26 May 2018 23:13:28 +0000

n2ri wrote:

need some help connecting to my atlas scanner. it keeps trying to use IE instead of Firefox which is default browser and always was b4. seems it cant find scanner which is plugged into same router as my PC. power lights on. even tried WIFI and supposedly saved login on a usb and plugged it in scanner as it said to do. still nada just times out. how do I see port its supposed to be on? be nice if it would work again so I could update software from over 2 years ago since last ran. my internet provider has changed 3 times since then. cant remember how I 1st got it going back then. and my Sons dont help anymore with my IT needs and no income to hire somebody so I'm on my own.

The Atlas is based on a PI correct?

If that is so then the network credentials are on the SDcard in a file called wpa_supplicant.

Just open it in wordpad, edit and save it as a text file.

The contents of the file will look like this.

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

# !!!!! HEADS-UP MACOSX USERS !!!!!
#
# If you use Textedit to edit this file make sure to use "plain text format"
# and "disable smart quotes" in "Textedit > Preferences", otherwise Textedit
# will use none-compatible characters and your network configuration won't
# work!
#
# !!!!! HEADS-UP MACOSX USERS !!!!!

network={
ssid="your network name"
psk="your network password"
key_mgmt=WPA-PSK
}

Re: trying to start scanner after long time to update

null@example.com (n2ri) — Sat, 26 May 2018 23:04:48 +0000

need some help connecting to my atlas scanner. it keeps trying to use IE instead of Firefox which is default browser and always was b4. seems it cant find scanner which is plugged into same router as my PC. power lights on. even tried WIFI and supposedly saved login on a usb and plugged it in scanner as it said to do. still nada just times out. how do I see port its supposed to be on? be nice if it would work again so I could update software from over 2 years ago since last ran. my internet provider has changed 3 times since then. cant remember how I 1st got it going back then. and my Sons dont help anymore with my IT needs and no income to hire somebody so I'm on my own.

trying to start scanner after long time to update

null@example.com (n2ri) — Mon, 21 May 2018 06:14:10 +0000

having issues getting it to link and start. scanner is powered and Ethernet cable connected to router but ATLAS3D_Windows.hta only wants to use IE and wont connect like last time I used it. I tried WIFI but had to input new login info in and it said something about saving it and to put thumb drive in scanner?

my Comodo AV/FW dont like using IE either. cant find way to re-establish connection. help needed please Thanks.

Mitch Garstang