<![CDATA[SoliForum - 3D Printing Community — XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/topic/17240/xyz-davinci-pro-jr-does-not-want-to-use-the-03mm-cartridge/ Fri, 06 Apr 2018 17:51:58 +0000 PunBB <![CDATA[Re: XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/post/143459/#p143459 http://soliforum.com/i/?7R1n4BM.jpgPETG is great for fragile detail. The blue Chinese characters are Machinable Wax.

]]> Fri, 06 Apr 2018 17:51:58 +0000 https://www.soliforum.com/post/143459/#p143459 <![CDATA[Re: XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/post/143458/#p143458 As it turned out, one has to use the change nozzle function. Duh. After a nice call to XYZ they told me you have to actually REMOVE the cartridge every time you try to get it recognized by the printer.
       Tried it three times. On the third time, it saw the new cartridge correctly and now it is working just fine. I have had a FlashForge Finder, a Monoprice Mini and an XYZ mini.
       This DaVinci Pro Jr. is by far the best working and hardest used printer I have. And it uses third party filaments.
       Along with PETG, which I find FAR superior to PLA, a nicely lubricating filament I have used recently is the new Machinable Wax. Ran through a whole 2.2 kg reel without a single jam or hangup.
smile

]]> Fri, 06 Apr 2018 17:39:24 +0000 https://www.soliforum.com/post/143458/#p143458 <![CDATA[Re: XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/post/143457/#p143457 You probably need to upload the file to the printer while the .3 cartridge is installed. It probably saves printer values such as cartridge type on upload and if those change for some reason before printing it alerts you.

]]> Fri, 06 Apr 2018 15:37:24 +0000 https://www.soliforum.com/post/143457/#p143457 <![CDATA[Re: XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/post/143454/#p143454 By the way, I'm a Letterform artist. In San Diego, California. In Spanish Village Art Center in Balboa Park. I print things, make molds and then cast them in Pewter.http://soliforum.com/i/?08qSrMh.jpg

]]> Fri, 06 Apr 2018 13:21:25 +0000 https://www.soliforum.com/post/143454/#p143454 <![CDATA[XYZ Davinci Pro Jr. does not want to use the 0.3mm cartridge]]> https://www.soliforum.com/post/143453/#p143453 I love the snap in cartridges. But when I got the 0.3mm cartridge today my Pro Jr. says "This file must be ...with the 0.4mm nozzle"
Soft and Firmware is updated. Using XYZ PETG. Simply won't let me print with it. But it loads and feeds. Any Thoughts, Folks?

]]> Fri, 06 Apr 2018 13:12:15 +0000 https://www.soliforum.com/post/143453/#p143453