SoliForum - 3D Printing Community — Which option

Re: Which option

null@example.com (OneMadDude) — Tue, 27 Mar 2018 15:24:21 +0000

Thanks for the comments I have ordered a new ramps setup which I should get by the end of the week
Then I will look at reusing the current board in another project

Re: Which option

null@example.com (carl_m1968) — Mon, 26 Mar 2018 01:25:15 +0000

Kronikabuse wrote:

What printer

Click his link, it takes you to the Amazon UK page where his printer is sold at.

It's called a Win Tintin looks like one of the many generic Prusa clones.

Re: Which option

null@example.com (yizhou.he) — Sun, 25 Mar 2018 20:30:21 +0000

https://www.amazon.co.uk/s/ref=nb_sb_no … rds=gt2560

http://www.geeetech.com/Documents/Users … GT2560.pdf

Double check if your board are the same one.

People usually check the mosfet for the heated bed first for this kind of issue and it is usually cheaper to replace the mosfet than replace the whole board. But if price is not a concern and you want a better and fancy board, you don't have to stick with GT2560.

Re: Which option

null@example.com (Kronikabuse) — Sun, 25 Mar 2018 19:17:27 +0000

What printer

Which option

null@example.com (OneMadDude) — Sun, 25 Mar 2018 16:52:29 +0000

Today I tried printing but my bed isn't heating up, the bed is fine (connected to hot end power and heated up fine)
So do I try and get a new controller (the same as it currently has) or just drop a RAMPS board in its place.
Its a little over 1 year old
This is the model (Amazon link)
https://www.amazon.co.uk/Win-Tinten-Acc … win-tinten