<![CDATA[SoliForum - 3D Printing Community — latest junior firmware information]]> https://www.soliforum.com/topic/17080/latest-junior-firmware-information/ Fri, 26 Jan 2018 20:47:37 +0000 PunBB <![CDATA[Re: latest junior firmware information]]> https://www.soliforum.com/post/142022/#p142022 Magic Matt wrote:

The nozzle temp adjust is relative to the temperature on the spool tag. You can go up or down by up to 10C. It is specifically for the Junior and Mini.

ok iam using white at the moment and i have upped the temp by 10deg in the xyz slicer software, lowered from 0.3 to 0.2 and set the speed to slow. and it prints the white just about perfect now, so i think the small adjustments make a difference to my prints.

]]> Fri, 26 Jan 2018 20:47:37 +0000 https://www.soliforum.com/post/142022/#p142022 <![CDATA[Re: latest junior firmware information]]> https://www.soliforum.com/post/142010/#p142010 The nozzle temp adjust is relative to the temperature on the spool tag. You can go up or down by up to 10C. It is specifically for the Junior and Mini.

]]> Fri, 26 Jan 2018 16:29:45 +0000 https://www.soliforum.com/post/142010/#p142010 <![CDATA[latest junior firmware information]]> https://www.soliforum.com/post/141998/#p141998 iam using a junior on the latest firmware, in xyz slicer i have seen settings to adjust nozzle temps and a few other adjustments, if i mess with the adjustments will my junior print with the new adjustments ?. or does the junior ignore them and do its own thing.

]]> Fri, 26 Jan 2018 09:40:36 +0000 https://www.soliforum.com/post/141998/#p141998