<![CDATA[SoliForum - 3D Printing Community — Da Vinci Mini Error 0031]]> https://www.soliforum.com/topic/16966/da-vinci-mini-error-0031/ Sun, 17 Dec 2017 21:12:06 +0000 PunBB <![CDATA[Re: Da Vinci Mini Error 0031]]> https://www.soliforum.com/post/140785/#p140785 Check that the Y-axis motor is connected, then check that the Y-axis sensor is in the right position and the connector is plugged in.

This is usually caused by wire harness issue, either plug for y-axis motor/Y-axis endstop is loose or broken wire.

Check the wire for y-axis motor/Y-axis endstop with multimeter if possible.

Switch with x-axis motor/Y-axis endstop wire if you don't have multimeter. If it is the wire, your error code will change to 0030.

]]> Sun, 17 Dec 2017 21:12:06 +0000 https://www.soliforum.com/post/140785/#p140785 <![CDATA[Da Vinci Mini Error 0031]]> https://www.soliforum.com/post/140782/#p140782 Does anyone know how to fix error code 0031 on da Vinci Mini W?

]]> Sun, 17 Dec 2017 19:47:41 +0000 https://www.soliforum.com/post/140782/#p140782