<![CDATA[SoliForum - 3D Printing Community — Cavities being filled when printing.]]> https://www.soliforum.com/topic/16887/cavities-being-filled-when-printing/ Tue, 14 Nov 2017 08:31:33 +0000 PunBB <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139781/#p139781 another point may be those different colour surfaces in the preview, have you checked that your surfaces are oriented correctly, you may have the a surface facing the wrong way which might confuse the software.

]]> Tue, 14 Nov 2017 08:31:33 +0000 https://www.soliforum.com/post/139781/#p139781 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139780/#p139780 I have never had a problem with an stl file exported from CAD - which CAD are you using - I use Microstation, I generate a solid, then generate another solid for the interior, which I insert into position and subtract from the original solid, the handle would be another solid that would be merged into the original. my da vinci 1.0s is stock and only ever tries to repair files that I have obtained from elsewhere. another trick for the interior, is to take the original shape, copy it,scale it to get the wall thickness you require then insert into the  inside and once again subtract the internal solid from the external one, the important thing is to work with solids - not meshes. I could also do exactly the same in AutoCAD as Microstation, but its more fiddly, so I prefer microstation for 3d work. by the way I used to be a drawing office manager, so I really do know my CAD (this is why my machine is stock - all I wanted was a machine I could plug and play without having to fiddle with settings - accepting the fact that I would be paying more for the reels of filament).

]]> Tue, 14 Nov 2017 08:17:21 +0000 https://www.soliforum.com/post/139780/#p139780 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139745/#p139745 Thanks All of you who has helped!

I exported the .stl from the CAD program directly, that seemed to help that the XYZ software was able to transform into a seemingly good looking print format.
The problem now is nozzle being clogged... :-( But thats another problem.

Thanks Guys!

]]> Sat, 11 Nov 2017 19:38:03 +0000 https://www.soliforum.com/post/139745/#p139745 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139744/#p139744 Another thought would be to load it into Meshmixer and see what that tool has to say.  It will point out each issue and correct them for you.  It may or may not be enough to make it slice correctly.  Can't hurt to try.

]]> Sat, 11 Nov 2017 19:29:19 +0000 https://www.soliforum.com/post/139744/#p139744 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139735/#p139735 Thanks Carl!
I will see if able to get to .stl directly then first. As I guess that would be the best and most easy way forward?

]]> Sat, 11 Nov 2017 15:17:05 +0000 https://www.soliforum.com/post/139735/#p139735 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139734/#p139734 A CAD model is fine as long as it is complete and void of imperfections like this one. Most CAD software can export directly to STL. TinkerCAD is a quick and dirt modeling software that is easy to use for simple things like this. Other software is out there just Google 3D modeling software of 3D printing. There are also several threads here in this forum that has asked the same question about software to use.

]]> Sat, 11 Nov 2017 15:12:02 +0000 https://www.soliforum.com/post/139734/#p139734 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139733/#p139733 @carl

Ok, I see. so the software is not good enough top handle actual CAD models, is that what you say?
I am having trouble remaking the CAD model as this is the original design and we need this in order to see the actual design IRL.
If remaking I guess a lot of work in another software.

@all
No other software to make a quality .stl file then? Form .igs and the CAD model.

Would another than the XYZware make it better and how to use that for printing with the XYZ printer?

]]> Sat, 11 Nov 2017 15:02:35 +0000 https://www.soliforum.com/post/139733/#p139733 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139732/#p139732 http://soliforum.com/i/?EPT9sTw.png

]]> Sat, 11 Nov 2017 14:54:00 +0000 https://www.soliforum.com/post/139732/#p139732 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139731/#p139731 Based on what I see in your image the model is not good for printing. All those irregular surfaces will be interpreted by the slicer as solids. You are going to need to remake that model and figure out a way to hollow it so the inside surface is smooth. I would try using inverted domes and a hollow dome as well to make the hollow. Not sure what software you use to develop models but surfaces must be clean for 3d printing. Rough edges and stuff like I see in this model can be interpreted as another surface by the slicer.

]]> Sat, 11 Nov 2017 14:43:56 +0000 https://www.soliforum.com/post/139731/#p139731 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139730/#p139730 Thanks!
I have assured that the suport is of, no raft, no brim (seems not to have the need for those to last, brim and raft when testing and cavity facing upwards).
Still the same when preparing to print.
Uploaded two pictures for showing better what is happening.
http://soliforum.com/i/?GKeOSKr.png

]]> Sat, 11 Nov 2017 14:38:55 +0000 https://www.soliforum.com/post/139730/#p139730 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139729/#p139729 When you are printing or exporting you will see the following screen. Click on ADVANED and you will get the secon screen.

http://soliforum.com/i/?0JQjIwg.jpg

http://soliforum.com/i/?XbRNl50.jpg

]]> Sat, 11 Nov 2017 14:08:57 +0000 https://www.soliforum.com/post/139729/#p139729 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139727/#p139727 Ok, thanks!
I have tried to print either way, both upside down and the other way around (cavity facing upwards).
Is there any way of turning of internal supports then?
Does the XYZ software add them automatically?

/P

]]> Sat, 11 Nov 2017 13:31:33 +0000 https://www.soliforum.com/post/139727/#p139727 <![CDATA[Re: Cavities being filled when printing.]]> https://www.soliforum.com/post/139724/#p139724 There is no attached file. But if you are actually printing it upside down then chances are you have supports turned on and the slicer is adding those supports where there would be overhangs such as the handle and the interior.

]]> Sat, 11 Nov 2017 12:02:00 +0000 https://www.soliforum.com/post/139724/#p139724 <![CDATA[Cavities being filled when printing.]]> https://www.soliforum.com/post/139723/#p139723 Hi,

I am trying to print a bowl with a handle in my XYZ Printing Da Vinci Jr 1.0.
The CAD mode in IGS, seems to be of good quality, with a large cavity in the middle (being a bowl, that is), also with holes and cavities as should be in the handle of the bowl for hanging the finished bowl.
The model is imported with some warning for having to be repaired, which I acknowledge and let the XYZware to, in to the program seeming to be a correct CAD model still.
Then when making an attempt to print this model, the software calculates and slices and in the process fills all the cavities, making the bowl rather useless.
Why?
And how to overcome this feature of the program?
Any ideas please... :-)

The uploaded file showing the bowl up side down with the cavity facing downwards.

/P

]]> Sat, 11 Nov 2017 11:55:52 +0000 https://www.soliforum.com/post/139723/#p139723