<![CDATA[SoliForum - 3D Printing Community — Printing phone case.]]> https://www.soliforum.com/topic/16843/printing-phone-case/ Tue, 16 Jan 2018 23:43:20 +0000 PunBB <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/141700/#p141700 Design some cases? It means you have a 3D software, so you can buy a caliper, measure the dimensions from your Xiaomi phones,
or search some drawings online as ref., then you can design and print a prototype, update it, complete it as I did.
You only need a scanner for some models you couldn't measure.

http://soliforum.com/i/?4I0URZU.jpg


http://soliforum.com/i/?uSDjcAj.jpg

]]> Tue, 16 Jan 2018 23:43:20 +0000 https://www.soliforum.com/post/141700/#p141700 <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/139157/#p139157 Scanners also require software manipulation . A good scanner cost way more than a 3d printer . they are not a magic wand.

]]> Tue, 24 Oct 2017 10:22:52 +0000 https://www.soliforum.com/post/139157/#p139157 <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/139143/#p139143 All a scanner would do is let you scan the phone which would give you a negative form to use as a subtraction on modeling software but that is it. You should also know that even if you scan a phone you will still need to account for filament shrinkage and the X and dimension variations on your printer. Even the most tuned printer is off by .02mm or so from design to what is printed. A stock machine is usually even worse. So the chances are very high your first several models will be too large or too small on one or more of the axis. Like others said it would be cheaper to get a set of calipers and measure the phone and such and make the design from scratch. Adjustments would be easier then as well.

]]> Mon, 23 Oct 2017 22:12:51 +0000 https://www.soliforum.com/post/139143/#p139143 <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/139138/#p139138 Yep I agree

https://www.youtube.com/watch?v=KPWEihNkgWE

]]> Mon, 23 Oct 2017 20:47:14 +0000 https://www.soliforum.com/post/139138/#p139138 <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/139137/#p139137 yup, what he said  ^^^

]]> Mon, 23 Oct 2017 20:32:38 +0000 https://www.soliforum.com/post/139137/#p139137 <![CDATA[Re: Printing phone case.]]> https://www.soliforum.com/post/139115/#p139115 be cheaper to buy a good caliper, take some measurements and model it up yourself

]]> Mon, 23 Oct 2017 10:28:30 +0000 https://www.soliforum.com/post/139115/#p139115 <![CDATA[Printing phone case.]]> https://www.soliforum.com/post/139111/#p139111 Hi guys i want to design some phone case for my phone (xiaomi) but i cant find any .stl file for my xiaomi phone. Im afraid after i printed the design out the size can’t matched with my phone. Do you have any suggestion what scanner should i buy? and how its work? i prefer the low budgeted one thanks big_smile

]]> Mon, 23 Oct 2017 09:15:40 +0000 https://www.soliforum.com/post/139111/#p139111