<![CDATA[SoliForum - 3D Printing Community — FilaWinder BBspool Adaptor]]> https://www.soliforum.com/topic/16841/filawinder-bbspool-adaptor/ Thu, 08 Feb 2018 05:06:42 +0000 PunBB <![CDATA[Re: FilaWinder BBspool Adaptor]]> https://www.soliforum.com/post/142252/#p142252 Try this one.
Thats what i use.
https://www.thingiverse.com/thing:2786127
I had them made long time ago, just never published.

]]> Thu, 08 Feb 2018 05:06:42 +0000 https://www.soliforum.com/post/142252/#p142252 <![CDATA[Re: FilaWinder BBspool Adaptor]]> https://www.soliforum.com/post/139202/#p139202 Ah. I have probably uploaded the old stl with the infil part. Yes should not cause any problems, maybe a little extra filament to the edges as its not attached. I will get the stl replaced.
Glad it helps out.

]]> Wed, 25 Oct 2017 20:52:54 +0000 https://www.soliforum.com/post/139202/#p139202 <![CDATA[Re: FilaWinder BBspool Adaptor]]> https://www.soliforum.com/post/139199/#p139199 audiobull wrote:

I have just finished a new spool adaptor which allows for spools with larger center holes to be used. I could not find anything that had already been done or shared so hopefully it helps.
Will stop the spool touching the drive gear and the pins on the control board.

https://www.thingiverse.com/thing:2601175

I noticed in the STL you have a circle floating in midair in the middle.  It didn't seem to mess up my print of it, and it works better than the adapter I was using before, so thank you.

]]> Wed, 25 Oct 2017 19:37:22 +0000 https://www.soliforum.com/post/139199/#p139199 <![CDATA[Re: FilaWinder BBspool Adaptor]]> https://www.soliforum.com/post/139117/#p139117 nice work

]]> Mon, 23 Oct 2017 10:29:57 +0000 https://www.soliforum.com/post/139117/#p139117 <![CDATA[FilaWinder BBspool Adaptor]]> https://www.soliforum.com/post/139106/#p139106 I have just finished a new spool adaptor which allows for spools with larger center holes to be used. I could not find anything that had already been done or shared so hopefully it helps.
Will stop the spool touching the drive gear and the pins on the control board.

https://www.thingiverse.com/thing:2601175

]]> Mon, 23 Oct 2017 06:04:07 +0000 https://www.soliforum.com/post/139106/#p139106