Je funkční využití NFC samolepky, tam si dáte 300m a o nic se nestaráte. Pak to dojde, taks e vezme další samolepka NFC a šup dalších 300m.

Třeba to konečně výrobce pochopí, že je dement, když omezuje zákazníky na svoje filamenty. Měl jsem vzorek od výrobce 3DW a funguje na tiskárně lépe jak originální filament.

Kdyby to výrobce pochopil a zpřístupnil mazání záznamů z tiskárny, tak by udělal nejlíp. Pak by se k němu zákaziníci rádi vraceli, takto je jen umí rozlobit.

Boys all nice, but finally find a way to clear the NFC chip from the printer memory. Then it could be reset indefinitely.

There is a functional use of NFC stickers, there you will put 300m and you do not care. Then it will take another NFC sticker and take another 300m.

Perhaps the manufacturer will finally understand that it is dement when it restricts customers to their filaments. I had a sample from the manufacturer 3DW and it works better on the printer than the original filament.

If the manufacturer understood and made available the deletion of records from the printer, he would do the best. Then the customers would like to return to it, so they can only be angry.

That is why XYZprinting filament color are so limited, they need to be able to handle over extrusion without constantly jam the hot-end.

did you try set it to 1 and add the gcode? these gcode supposed be able to restore extrusion power. I want to test myself but my Jr. is with RAMPS now.

M350 X16 Y16 Z16 E16
M92 X80 Y80 Z2560
M92 E88:88
M500

i could try that latter but i am 99% sure i got it working but you need to use s3d and no need to xyzware. i have it printing right now and it looks fine will let you know when its done

M350 X16 Y16 Z16 E16
M92 X80 Y80 Z2560
M92 E88:88
M500

; extruder = 1 doesn't work or the gcode doesn't work? Did you notice any difference after add the gcode? or did you get error message?

If you set it to one it says spool is emptied if you set it to 0 you get under Extrusion. If you set it to 0 and add a 2nd one set to 0 you get spool is emptied

Change line 8 to "; extruder = 0" is the cause of under extrusion. Change line 8 to "; extruder = 1" and see if you can still get it to print.

if "; extruder = 0" have to be used in order to start the print, can someone try to add these gcode between end of commented head and start of the gcode and see if it overcome the under extrusion issue?
M350 X16 Y16 Z16 E16
M92 X80 Y80 Z2560
M92 E88:88
M500

does not work

if "; extruder = 0" have to be used in order to start the print, can someone try to add these gcode between end of commented head and start of the gcode and see if it overcome the under extrusion issue?
M350 X16 Y16 Z16 E16
M92 X80 Y80 Z2560
M92 E88:88
M500

ok here is what worked for me on xzy jr 1.0w

1. sliced in s3d saved as .3w

2. opened in xyzware advance

3. Change line 5 to "; total_filament = 0"
Change line 6 to "; extruder_filament= 0"
Change line 8 to "; extruder = 0"

4. click L_Save

5. save to sd card

6.turn on printer

7. build from sd card pick file

8. it will fail

9. hit ok ok

10. build from sd card pick file and it will print

edit: i am getting crazy under extrusion doing it this way

I just noticed that too, I will look into that.

1. sliced in s3d saved as .3w

2. opened in xyzware advance

3. Change line 5 to "; total_filament = 0"
Change line 6 to "; extruder_filament= 0"
Change line 8 to "; extruder = 0"

4. click L_Save

5. save to sd card

6.turn on printer

7. build from sd card pick file

8. it will fail

9. hit ok ok

10. build from sd card pick file and it will print

edit: i am getting crazy under extrusion doing it this way

http://www.soliforum.com/topic/16565/ho … pdated-10/

There are complicated version and simple version, read the simple version and see what you have missed.