<![CDATA[SoliForum - 3D Printing Community — Parts of print stringy.]]> https://www.soliforum.com/topic/16709/parts-of-print-stringy/ Wed, 13 Sep 2017 03:22:13 +0000 PunBB <![CDATA[Re: Parts of print stringy.]]> https://www.soliforum.com/post/137975/#p137975 When was the last time you cleaned your nozzle?

]]> Wed, 13 Sep 2017 03:22:13 +0000 https://www.soliforum.com/post/137975/#p137975 <![CDATA[Re: Parts of print stringy.]]> https://www.soliforum.com/post/137725/#p137725 lsgraphics wrote:

I have leveled bed 3 times to try and get right extrustion.   if i went closer it seemed like it was rubbing what was already laid down

What I mrant was your feedrate and your extruders steps per mm calibrated correctly.

]]> Mon, 04 Sep 2017 16:32:06 +0000 https://www.soliforum.com/post/137725/#p137725 <![CDATA[Re: Parts of print stringy.]]> https://www.soliforum.com/post/137712/#p137712 I have leveled bed 3 times to try and get right extrustion.   if i went closer it seemed like it was rubbing what was already laid down

]]> Mon, 04 Sep 2017 04:46:48 +0000 https://www.soliforum.com/post/137712/#p137712 <![CDATA[Re: Parts of print stringy.]]> https://www.soliforum.com/post/137710/#p137710 I am going with underextrusion based on the image. Is everything calibrated?

]]> Sun, 03 Sep 2017 22:01:23 +0000 https://www.soliforum.com/post/137710/#p137710 <![CDATA[Parts of print stringy.]]> https://www.soliforum.com/post/137708/#p137708 Hi been printing this for a bit and part of the print is banding on one side.  I leveled bed printing at 215 and 105 abs on a solidoodle 4.  First print in a while

]]> Sun, 03 Sep 2017 18:46:06 +0000 https://www.soliforum.com/post/137708/#p137708