SoliForum - 3D Printing Community — Hello from New Zealand

Re: Hello from New Zealand

null@example.com (kurt cobain) — Sat, 13 Jan 2018 12:13:57 +0000

Hello, I am from Indonesia.

Re: Hello from New Zealand

null@example.com (amandahlauridsen22) — Thu, 12 Oct 2017 06:00:41 +0000

thats interesting!

Re: Hello from New Zealand

null@example.com (amandahlauridsen22) — Thu, 12 Oct 2017 05:56:15 +0000

hi...

Re: Hello from New Zealand

null@example.com (JeremyLGSiegfried) — Thu, 20 Apr 2017 20:46:11 +0000

Be sure to read up on Marlin Firmware or Repetier-Firmware. Correctly configuring the firmware is a key step to a fully functional printer.

Re: Hello from New Zealand

null@example.com (grist) — Thu, 20 Apr 2017 06:55:14 +0000

Hmm, good question. I did download and install a firmware update. It's open source so I'll have a look though and see what I can see. Thanks for the tip.

Re: Hello from New Zealand

null@example.com (wardjr) — Tue, 18 Apr 2017 13:47:31 +0000

Welcome, do you have the bed heater enabled in the firmware?

Hello from New Zealand

null@example.com (grist) — Tue, 18 Apr 2017 06:33:14 +0000

Hi,

I've just finished putting together a Velleman k8200. Was quite a bit more work than I was expecting, but I took it easy and it seems to have come together mostly ok. Seems the controller board is faulty as it doesn't recognise the heated bed, but manually controlling it with an external power supply has let me make a few test prints.

Currently printing out some cogwheels for my home-made robot arm and mulling the possibilities.

Cheers,
grist.