https://www.soliforum.com/topic/16293/need-help-to-extrude-nylon-66/ Mon, 08 May 2017 10:39:41 +0000 PunBB https://www.soliforum.com/post/135276/#p135276 ill try that maybe this can work

]]> Mon, 08 May 2017 10:39:41 +0000 https://www.soliforum.com/post/135276/#p135276 https://www.soliforum.com/post/134109/#p134109 Thanks that's what I'm going to try...

]]> Thu, 30 Mar 2017 00:06:35 +0000 https://www.soliforum.com/post/134109/#p134109 https://www.soliforum.com/post/134105/#p134105 Just wire in an ~18v power supply, or, better yet, solder on a female connector for one if you can. As Tim has mentioned before, the heater band, PID controller, and fans are capable of 18v operation. (The stall board just shaves it down to 12v)

]]> Wed, 29 Mar 2017 20:24:48 +0000 https://www.soliforum.com/post/134105/#p134105 https://www.soliforum.com/post/134101/#p134101 Yes, melting temp is higher, have no details about the materials that's why I tried.
guess I will need replace the heater with some fire source or 18V P supply

]]> Wed, 29 Mar 2017 17:15:04 +0000 https://www.soliforum.com/post/134101/#p134101 https://www.soliforum.com/post/134099/#p134099 maybe because nylon 6.6 has a melting point 0f 264 deg C

]]> Wed, 29 Mar 2017 15:33:21 +0000 https://www.soliforum.com/post/134099/#p134099 https://www.soliforum.com/post/134083/#p134083 I was offered Nylon 6.6 pellets, tried to extrude at max temp approx 235 but nothing out, its not melting I mean looks like I put gravel, removed the nozzle and took me lot of time to clean the gravel oops the nylon pellets.

]]> Tue, 28 Mar 2017 18:19:11 +0000 https://www.soliforum.com/post/134083/#p134083