SoliForum - 3D Printing Community — da Vinci Mini - Z-Axis

Re: da Vinci Mini - Z-Axis

null@example.com (qudalu) — Sat, 25 Mar 2017 07:55:01 +0000

If I am not online, please email me (qudalu@qq.com)

null@example.com (qudalu) — Sat, 25 Mar 2017 07:46:26 +0000

哇哦，看到你的照片，步进电机应该已经解体了~~~~中国的报价，这种电机售价要150RMB~~~~~

null@example.com (qudalu) — Sat, 25 Mar 2017 07:44:16 +0000

我在中国，看不到境外视频，但是根据你的描述，建议你拆下Z轴电机，检查外壳损坏情况。

null@example.com (Furrytail99) — Thu, 16 Mar 2017 17:04:11 +0000

Hi kr15_uk,

Is that the long thread that the extruder moves up and down on?

If it is it will rotate.. but not very smoothly it feels like that there is a lot of friction to it rotating.

null@example.com (kr15_uk) — Thu, 16 Mar 2017 17:00:45 +0000

Have you tried turning leadscrew by hand to ensure it's not binding somewhere?!

null@example.com (Furrytail99) — Thu, 16 Mar 2017 11:32:00 +0000

Hello helpful people

The printer has been working with out any problems until yesterday when it started making a strange noise after a while it then started beeping.

Printer was powered off then back on. Same thing happens when you try to print, go into jog mode or calibrate.

The attached video shows what is happening after going into jog mode after clicking on the home button.

It then comes up with the error code 0032

It also looks like a bit has dropped off the Z-Axis motor