<![CDATA[SoliForum - 3D Printing Community — IM stuck and not sure how to fix.]]> https://www.soliforum.com/topic/16101/im-stuck-and-not-sure-how-to-fix/ Wed, 22 Feb 2017 09:07:54 +0000 PunBB <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132913/#p132913 Check the controller settings to find options to fix this problem.

]]> Wed, 22 Feb 2017 09:07:54 +0000 https://www.soliforum.com/post/132913/#p132913 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132651/#p132651 thank you i will try that as the thing still dosnt f-cking work.
frustrating part is it came out of a fully working printer, run like a champ. just upgraded to smoothie.

]]> Thu, 16 Feb 2017 16:01:44 +0000 https://www.soliforum.com/post/132651/#p132651 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132142/#p132142 Follow the traces on the board from the E0 terminal screw block. Check each component (namely the MOSFET) in the path from the processor's pin to the terminal. If everything is good there, there's a chance the actual processor pin is bad (check every other possible problem first though!)

I had an mpx.3 (modified clone of MKS BASE) that lost E1 functionality when the pin for it stopped working. I swapped the MOSFETS, reflashed the firmware, changed cartridges, etc. Now the board waits to be used in my next single extruder build.

]]> Mon, 06 Feb 2017 11:52:06 +0000 https://www.soliforum.com/post/132142/#p132142 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132139/#p132139 hot end still not heating up. reading temps fine screen working, trying my last heater cartage then i dont know what to do anymore.. sooooooo frustrating checked everything so many times... grrrrrrrrrrrrrrr

]]> Mon, 06 Feb 2017 09:11:16 +0000 https://www.soliforum.com/post/132139/#p132139 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132135/#p132135 that link helped getting the heat bed going

]]> Mon, 06 Feb 2017 05:37:45 +0000 https://www.soliforum.com/post/132135/#p132135 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132124/#p132124 https://github.com/ozadr1an/Solidoodle- … in_v1_beta

]]> Sun, 05 Feb 2017 23:39:54 +0000 https://www.soliforum.com/post/132124/#p132124 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132123/#p132123 Ok I will try track that down,
Thank you.

]]> Sun, 05 Feb 2017 23:16:18 +0000 https://www.soliforum.com/post/132123/#p132123 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132119/#p132119 You could just use the Marlin version listed in the WIKI it's already configured for an SD.  Just select the correct board number and thermistor table 5 for the E3d.  Set max temp to 29O and your good to go.  But a bed temp reading of zero tells me something is wrong with that thermistor connection.

]]> Sun, 05 Feb 2017 22:01:00 +0000 https://www.soliforum.com/post/132119/#p132119 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132113/#p132113 Tin Falcon wrote:

Do you have a multi meter are you using it to troubleshoot ?
look at the connectors  the inserts sometimes slip in and do not connect with the pins.
You sad the board came from a delta did you reload with marlin configured with the Cartesian settings?


multi meter is doing double time on this project. connections have all been gone over at least 10 times and as for movement it is configured as cartesian as i have all axis working,

can some one have a look over the files.
marlin is new to me so im not to sure whats needed to cover all the bases.

]]> Sun, 05 Feb 2017 19:06:40 +0000 https://www.soliforum.com/post/132113/#p132113 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132088/#p132088 Do you have a multi meter are you using it to troubleshoot ?
look at the connectors  the inserts sometimes slip in and do not connect with the pins.
You sad the board came from a delta did you reload with marlin configured with the Cartesian settings?

]]> Sun, 05 Feb 2017 13:45:18 +0000 https://www.soliforum.com/post/132088/#p132088 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132080/#p132080 Can the heated bed be commented out to switch it off in the program to test? Still learning marlin sorry for the dumb question

]]> Sun, 05 Feb 2017 10:05:44 +0000 https://www.soliforum.com/post/132080/#p132080 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132078/#p132078 im not sure how to post the files for some one to have a look over.

]]> Sun, 05 Feb 2017 07:04:09 +0000 https://www.soliforum.com/post/132078/#p132078 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132075/#p132075 3 thermistors and 3 different hot beds. No dice

]]> Sun, 05 Feb 2017 06:25:35 +0000 https://www.soliforum.com/post/132075/#p132075 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132073/#p132073 Thank you for the lead. I will check it out now and let you know

]]> Sun, 05 Feb 2017 05:36:39 +0000 https://www.soliforum.com/post/132073/#p132073 <![CDATA[Re: IM stuck and not sure how to fix.]]> https://www.soliforum.com/post/132071/#p132071 If your reading zero on your bed I'd guess your getting a reported error.  The firmware will prevent proper function until the problem is corrected.  The bed heater thermistor or wiring is causing the error.  Focus your efforts there first.

]]> Sun, 05 Feb 2017 04:14:59 +0000 https://www.soliforum.com/post/132071/#p132071