<![CDATA[SoliForum - 3D Printing Community — Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/topic/16048/da-vinci-jr-10sd-card-error-file-not-compatible-with-da-vinci-jr/ Sun, 20 May 2018 19:13:11 +0000 PunBB <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/144069/#p144069 Hi Yizhou.he, that seems to have worked a treat.  I imported the file to Freecad and exported again as suggested.  Many thanks.

]]> Sun, 20 May 2018 19:13:11 +0000 https://www.soliforum.com/post/144069/#p144069 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/144023/#p144023 try open the stl file with other software such As tinkercad and export to stl again and see If it makes difference.

]]> Thu, 17 May 2018 02:17:47 +0000 https://www.soliforum.com/post/144023/#p144023 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/144019/#p144019 Hi, I have a similar problem.  I found a 3D image on Sketchup, a skp file.  Converted it to STL and put it in XYZware to make it a 3W.  XYZware was set up for my printer a Da Vinci Junior.  The printer has the latest software and firmware but it gives the "File Not Compatible with Da Vinci Jr" message when I try to print it.  Other items on the card print ok so I doubt it is the card port or SD card itself.  Any suggestions?

]]> Wed, 16 May 2018 19:47:30 +0000 https://www.soliforum.com/post/144019/#p144019 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/132919/#p132919 LHickok wrote:

Update: Thanks to the advice provided here I was able to solve my problem by updating the firmware on the printer.  Thank you!  :-)

I'm glad you've fixed it with no braintwist.

Regards!

]]> Wed, 22 Feb 2017 12:00:26 +0000 https://www.soliforum.com/post/132919/#p132919 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/132905/#p132905 Update: Thanks to the advice provided here I was able to solve my problem by updating the firmware on the printer.  Thank you!  :-)

]]> Wed, 22 Feb 2017 02:34:35 +0000 https://www.soliforum.com/post/132905/#p132905 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131873/#p131873 Ok, I'm not sure if this will help or not, but I have version 2.2.0 if the firmware if you would like to load it and see if that helps. Just an option.

]]> Tue, 31 Jan 2017 23:59:48 +0000 https://www.soliforum.com/post/131873/#p131873 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131857/#p131857 Bozotclown1970 wrote:

Have you tried using another SD Card? The one they supplied with the printer may be going bad. You may try copying all data off of the original card then reformatting it. Then put all the data back on and see if that helps.

LHickok wrote:

I have attempted to replace the SD card and the same error persists

]]> Tue, 31 Jan 2017 17:58:36 +0000 https://www.soliforum.com/post/131857/#p131857 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131853/#p131853 Have you tried using another SD Card? The one they supplied with the printer may be going bad. You may try copying all data off of the original card then reformatting it. Then put all the data back on and see if that helps.

]]> Tue, 31 Jan 2017 17:14:14 +0000 https://www.soliforum.com/post/131853/#p131853 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131846/#p131846 Well, it's hard to give some advice on a forum where most people have used this printer much more than me, also they know the printer much deeper than me too.

I will recommend you to update to 2.2.0 firmware version, since 2.2.4 have some problems with the feeder (as i readed arround), and 2.2.7 is out of reset filament.

First blow the SD slot on printer for if there's some garbage over any pin peventing a good contact.

But, please wait a couple of days (at least 2) for if someone can give you a better advice.

Regards!.

]]> Tue, 31 Jan 2017 11:27:58 +0000 https://www.soliforum.com/post/131846/#p131846 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131711/#p131711 Thank you for your reply.  I just verified: 1.0.4

Should I update this?

]]> Sat, 28 Jan 2017 15:00:35 +0000 https://www.soliforum.com/post/131711/#p131711 <![CDATA[Re: Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131665/#p131665 What version of firmware are you running?

]]> Fri, 27 Jan 2017 01:46:47 +0000 https://www.soliforum.com/post/131665/#p131665 <![CDATA[Da Vinci Jr 1.0-SD Card Error "File Not Compatible with Da Vinci Jr."]]> https://www.soliforum.com/post/131446/#p131446 Hello Everyone,

I have had my Jr. 1.0 for over a year and have been able to print successfully for almost the entire time.  Recently though I have begun to experience an error at the start of a print.  After I select "Build from Card" regardless of the file chosen - even if I choose one that has successfully printed previously - there is a serious of beeps from the machine and then the following error message:

"File Not Compatible with da vinci jr."

The only choice then is to cancel the print.  Has anyone else experienced this?  Does anyone know the correct remedy?  Note: I have attempted to replace the SD card and the same error persists.  I have also opened a ticket with XYZ however that was a fruitless endeavor.

Thank you in advance for any support you can provide!

]]> Sat, 21 Jan 2017 20:44:26 +0000 https://www.soliforum.com/post/131446/#p131446